Thanks guys - will follow up on all the suggestions and post my results - may be a while as other things are going to get in the way. Thanks again.
On Tuesday, October 1, 2024 at 7:33:37 AM UTC+1 Ian Millard wrote: > The console may not but the actual sensor array will work with the GW1000 > gateway device which in turn works with the weewx-GW1000 driver. > > > On 30 Sep 2024, at 23:45, J.A. Garcia-Tenorio <[email protected]> wrote: > > The GW1000 driver will not work with the WS2910 console > > > This console works perfectly with the interceptor driver > > https://github.com/matthewwall/weewx-interceptor > > Regards > > El lunes, 30 de septiembre de 2024 a las 18:49:51 UTC+2, vince escribió: > >> Colin try the gw1000 (aka ecowitt) driver and see if your console/gateway >> is detected. >> Just follow the instructions on the driver's page. >> >> https://github.com/gjr80/weewx-gw1000 >> >> [GW1000] >> # This section is for the Ecowitt Gateway driver. >> >> # How often to poll the API, default is every 20 seconds: >> poll_interval = 20 >> >> # The driver to use: >> driver = user.gw1000 >> ip_address = 192.168.2.87 # <=== set this to the ip address of >> your console >> port = 45000 >> >> On Monday, September 30, 2024 at 6:11:04 AM UTC-7 Colin Lloyd wrote: >> >>> I've installed WEEWX successfully on my Linux Mint 21 PC. And the web >>> page at file:///var/www/html/weewx/index.html works OK. >>> >>> reply from sudo systemctl status weewx gives: >>> >>> weewx.service - WeeWX >>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled; vendor >>> preset: enabled) >>> Active: failed (Result: exit-code) since Mon 2024-09-30 10:44:45 >>> BST; 1h 1min ago >>> Docs: https://weewx.com/docs >>> Process: 2214 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited, >>> status=4) >>> Main PID: 2214 (code=exited, status=4) >>> CPU: 56ms >>> >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >>> return FineOffsetUSB(**config_dict[DRIVER_NAME]) >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >>> File "/usr/share/weewx/weewx/drivers/fousb.py", line 967, in __init__ >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >>> self.openPort() >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >>> File "/usr/share/weewx/weewx/drivers/fousb.py", line 1022, in openPort >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >>> raise weewx.WeeWxIOError("Unable to find USB device") >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine: **** >>> weewx.WeeWxIOError: Unable to find USB device >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL __main__: Unable to load >>> driver: Unable to find USB device >>> Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL __main__: **** >>> Exiting... >>> Sep 30 10:44:45 colin-PC systemd[1]: weewx.service: Main process exited, >>> code=exited, status=4/NOPERMISSION >>> Sep 30 10:44:45 colin-PC systemd[1]: weewx.service: Failed with result >>> 'exit-code'. >>> >>> In /etc/weewx/weewx.conf the driver is set to FineOffsetUSB - which >>> pointed to the (to me) most relevant station to my ECOWITT WS2910 station. >>> But the ECOWITT is a WiFi station - not USB. So I suspect I have linked up >>> with the wrong driver. Can anyone tell me which driver or clone system to >>> my ECOWITT I should be using. This is my first entry into commercial >>> weather stations having created my own Arduino or Raspberry Pi versions in >>> the past - so am a bit lost. >>> >>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/1f110389-5c37-4618-8719-643ff71a3b3bn%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/1f110389-5c37-4618-8719-643ff71a3b3bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/20727eeb-7523-4433-8f9e-2b48d4d10146n%40googlegroups.com.
