Re: [weewx-user] Re: Will the ECOWITT WS2910 work within WEEWX?

['Ian Millard' via weewx-user]

The console may not but the actual sensor array will work with the GW1000 gateway device which in turn works with the weewx-GW1000 driver.  On 30 Sep 2024, at 23:45, J.A. Garcia-Tenorio <ea4...@gmail.com> wrote: The GW1000 driver will not  work with the WS2910 console This console works perfectly with the interceptor driver https://github.com/matthewwall/weewx-interceptor Regards El lunes, 30 de septiembre de 2024 a las 18:49:51 UTC+2, vince escribió: Colin try the gw1000 (aka ecowitt) driver and see if your console/gateway is detected. Just follow the instructions on the driver's page. https://github.com/gjr80/weewx-gw1000 [GW1000]     # This section is for the Ecowitt Gateway driver.     # How often to poll the API, default is every 20 seconds:     poll_interval = 20     # The driver to use:     driver = user.gw1000     ip_address = 192.168.2.87    # <=== set this to the ip address of your console     port = 45000 On Monday, September 30, 2024 at 6:11:04 AM UTC-7 Colin Lloyd wrote: I've installed WEEWX successfully on my Linux Mint 21 PC. And the web page at file:///var/www/html/weewx/index.html works OK. reply from sudo systemctl status weewx gives: weewx.service - WeeWX      Loaded: loaded (/lib/systemd/system/weewx.service; enabled; vendor preset: enabled)      Active: failed (Result: exit-code) since Mon 2024-09-30 10:44:45 BST; 1h 1min ago        Docs: https://weewx.com/docs     Process: 2214 ExecStart=weewxd /etc/weewx/weewx.conf (code=exited, status=4)    Main PID: 2214 (code=exited, status=4)         CPU: 56ms Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine:     ****      return FineOffsetUSB(**config_dict[DRIVER_NAME]) Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine:     ****    File "/usr/share/weewx/weewx/drivers/fousb.py", line 967, in __init__ Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine:     ****      self.openPort() Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine:     ****    File "/usr/share/weewx/weewx/drivers/fousb.py", line 1022, in openPort Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine:     ****      raise weewx.WeeWxIOError("Unable to find USB device") Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL weewx.engine:     ****  weewx.WeeWxIOError: Unable to find USB device Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL __main__: Unable to load driver: Unable to find USB device Sep 30 10:44:45 colin-PC weewxd[2214]: CRITICAL __main__:     ****  Exiting... Sep 30 10:44:45 colin-PC systemd[1]: weewx.service: Main process exited, code=exited, status=4/NOPERMISSION Sep 30 10:44:45 colin-PC systemd[1]: weewx.service: Failed with result 'exit-code'. In /etc/weewx/weewx.conf the driver is set to FineOffsetUSB - which pointed to the (to me) most relevant station to my ECOWITT WS2910 station. But the ECOWITT is a WiFi station - not USB. So I suspect I have linked up with the wrong driver. Can anyone tell me which driver or clone system to my ECOWITT I should be using. This is my first entry into commercial weather stations having created my own Arduino or Raspberry Pi versions in the past - so am a bit lost. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1f110389-5c37-4618-8719-643ff71a3b3bn%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/EBDB3A89-6CF9-4611-A665-59EEFC3A6491%40btinternet.com.