Hey guys,
I've been going through some discussions but not quite sure if I did
everything rigth.
Due to the circumstances that the GW1000 Driver is all of a sudden not
available anymore, I decided to use the Interceptor driver when I changed
from "Simulation" to "Productive" mode yesterday evening.
I found out that the rain is not available in the database and saw some
discussions about it.
What I now did was adding some values to the Interceptor Stanza in the
weewx.conf:
[Interceptor]
driver = user.interceptor
device_type = ecowitt-client
port = 8000
[[sensor_map_extensions]]
rain = drain_piezo
rainRate = rrain_piezo
supplyVoltage = wh90batt
referenceVoltage = ws90cap_volt
But it shows me no rain in my skins. Currently it is not raining, but there
was rain this morning. Is the data only filling the actuall rain into the
database or also the data from this morning? If not from this morning, how
can I insert that data afterwards ?
in the log it shows me the following entries:
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter runtime=80319
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter heap=94012
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter vpd=0.071
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter rrain_piezo=0.000
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter erain_piezo=0.157
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter hrain_piezo=0.008
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter drain_piezo=0.157
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter wrain_piezo=0.157
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter mrain_piezo=0.157
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter yrain_piezo=0.157
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter srain_piezo=1
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter ws90cap_volt=2.5
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter ws90_ver=155
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter wh90batt=3.14
Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized
parameter interval=16
so rain is showing some values here...
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/4812582d-2b21-4315-a091-b369312cb2a8n%40googlegroups.com.
