There is a fork of the GW1000 driver here which was synced with Gary's main branch just before he went 'off air'. It is a better bet than the Interceptor driver. I have GW1000, GW2000 and GW3000 devices and they all wrk perfectly.
https://github.com/Millardiang/weewx-gw1000 On Wednesday, June 4, 2025 at 10:37:53 PM UTC+2 Markus Lösch wrote: > Also after some rain now, nothing shows up at rain. There is also nothing > written down in the database… > Anyone that can help? > > chin0x schrieb am Mittwoch, 4. Juni 2025 um 14:47:06 UTC+2: > >> Hey guys, >> >> I've been going through some discussions but not quite sure if I did >> everything rigth. >> >> Due to the circumstances that the GW1000 Driver is all of a sudden not >> available anymore, I decided to use the Interceptor driver when I changed >> from "Simulation" to "Productive" mode yesterday evening. >> >> I found out that the rain is not available in the database and saw some >> discussions about it. >> What I now did was adding some values to the Interceptor Stanza in the >> weewx.conf: >> [Interceptor] >> >> driver = user.interceptor >> device_type = ecowitt-client >> port = 8000 >> [[sensor_map_extensions]] >> rain = drain_piezo >> rainRate = rrain_piezo >> supplyVoltage = wh90batt >> referenceVoltage = ws90cap_volt >> >> But it shows me no rain in my skins. Currently it is not raining, but >> there was rain this morning. Is the data only filling the actuall rain into >> the database or also the data from this morning? If not from this morning, >> how can I insert that data afterwards ? >> >> in the log it shows me the following entries: >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter runtime=80319 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter heap=94012 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter vpd=0.071 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter rrain_piezo=0.000 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter erain_piezo=0.157 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter hrain_piezo=0.008 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter drain_piezo=0.157 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter wrain_piezo=0.157 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter mrain_piezo=0.157 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter yrain_piezo=0.157 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter srain_piezo=1 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter ws90cap_volt=2.5 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter ws90_ver=155 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter wh90batt=3.14 >> Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized >> parameter interval=16 >> >> so rain is showing some values here... >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/b95e35e4-ac78-4cec-94da-4b0a15c4f36dn%40googlegroups.com.
