Sorry, like this:
##############################################################################
[GW1000]
# This section is for the Ecowitt Gateway driver.
# How often to poll the API, default is every 20 seconds:
poll_interval = 20
# The driver to use:
driver = user.gw1000
ip_address = auto
port = 45000
sensor_map = wh40_batt:batteryStatus
[[[field_map_extensions]]]
soilTemp1 = temp9
##############################################################################
On Wednesday, December 31, 2025 at 7:34:18 PM UTC vince wrote:
> I have the soil temp sensor and a gw1200 here.
>
> I just added a [[field_map_extensions]] item to map it to a weewx db
> element
>
> [GW1000]
> [[field_map_extensions]]
> soilTemp1 = temp9 # map driver 'temp9' to weewx 'soilTemp1'
> # wh34_ch1_batt could be mapped to an
> available field
> # so if you want its battery status saved to
> the db
>
>
>
> On Wednesday, December 31, 2025 at 11:22:43 AM UTC-8 Ole Andreas Gløersen
> wrote:
>
>> I don't have a complete guide for your problem, but use "sudo journalctl
>> -u weewx -f" to check for sensor ID. I have also made a guide for
>> implementing my unknown sensors to WeeWX.
>>
>> Check it out for then you can use it as an approach for your problem.
>>
>> ons. 31. des. 2025 kl. 17:48 skrev O S <[email protected]>:
>>
>>> Hello all,
>>>
>>> I have an Ecowitt soil temperature sensor that is being picked up by the
>>> gateway (GW1200), but not by WeeWX (not on the report page, anyway).
>>>
>>> I am running WeeWX on a R-Pi 1, Debian Bookworm.
>>>
>>> Log is here: https://pastebin.com/Z26g3Xic with debug set to 1. The
>>> only changes I have made is to override some values and plots to exclude
>>> them from the html report page (Seasons).
>>>
>>> I have absolutely no idea where to start with this, so help from you
>>> people would be much appreciated, as usual.
>>>
>>> Thanks :)
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion visit
>>> https://groups.google.com/d/msgid/weewx-user/12f358fe-7d1a-45e0-8428-cccfc162e0f0n%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/12f358fe-7d1a-45e0-8428-cccfc162e0f0n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/75f1cdc1-5b21-49c7-a13c-e0b689d682f6n%40googlegroups.com.
