Thanks.
I didn't add the sensor_map line, so I have no idea why it's there either!
OK, so what I have done is right then, I have added:
[[field_map_extensions]]
soilTemp1 = temp9
to the bottom of the [GW1000] section.
What do I do to get the value under Current Conditions and a plot on the
report page? Please?
Thanks.
On Wednesday, December 31, 2025 at 9:52:17 PM UTC vince wrote:
> I have no idea what the sensor_map element is nor what it would do. And
> your later reply had too many [[[ ]]] levels.
>
> If you are using Gary's original GW1000 driver then just add the
> [[field_map_extensions]] two lines to the [GW1000] section in weewx.conf,
> then restart weewx.
>
> [GW1000]
> poll_interval = 20
> driver = user.gw1000
> ip_address = 192.168.2.87 # gw1200
> port = 45000
> [[field_map_extensions]]
> outTempBatteryStatus = wh26_batt # outside t+h sensor
> batteryStatus1 = wh31_ch1__batt # indoor t+h sensors on channels
> 1-5
> batteryStatus2 = wh31_ch2__batt
> batteryStatus3 = wh31_ch3__batt
> batteryStatus4 = wh31_ch4__batt
> batteryStatus5 = wh31_ch5__batt
> batteryStatus8 = wh51_ch1__batt # soil moisture
> soilTemp1 = temp9 # wh34 soil temp
> # unfortunately no
> batteryStatus9 exists for wh34_ch1_batt
>
> rain = t_rain # WH40BH as primary rain sensor
> rainBatteryStatus = wh40_batt # and its battery status
>
>
> If you are running a dpkg installation of weewx, you can test the driver
> with:
> PYTHONPATH=/etc/weewx/bin python3 -m user.gw1000 --test-driver
> --ip-address=192.168.2.87
>
> On Wednesday, December 31, 2025 at 1:26:36 PM UTC-8 O S wrote:
>
>> Hi Vince, thanks - like this?
>>
>>
>> ##############################################################################
>>
>> [GW1000]
>> [[field_map-extensions]]
>> soilTemp1 = temp9
>> # This section is for the Ecowitt Gateway driver.
>>
>> # How often to poll the API, default is every 20 seconds:
>> poll_interval = 20
>>
>> # The driver to use:
>> driver = user.gw1000
>> ip_address = auto
>> port = 45000
>> sensor_map = wh40_batt:batteryStatus
>>
>>
>> ##############################################################################
>>
>> On Wednesday, December 31, 2025 at 7:34:18 PM UTC vince wrote:
>>
>>> I have the soil temp sensor and a gw1200 here.
>>>
>>> I just added a [[field_map_extensions]] item to map it to a weewx db
>>> element
>>>
>>> [GW1000]
>>> [[field_map_extensions]]
>>> soilTemp1 = temp9 # map driver 'temp9' to weewx 'soilTemp1'
>>> # wh34_ch1_batt could be mapped to an
>>> available field
>>> # so if you want its battery status saved to
>>> the db
>>>
>>>
>>>
>>> On Wednesday, December 31, 2025 at 11:22:43 AM UTC-8 Ole Andreas
>>> Gløersen wrote:
>>>
>>>> I don't have a complete guide for your problem, but use "sudo
>>>> journalctl -u weewx -f" to check for sensor ID. I have also made a guide
>>>> for implementing my unknown sensors to WeeWX.
>>>>
>>>> Check it out for then you can use it as an approach for your problem.
>>>>
>>>> ons. 31. des. 2025 kl. 17:48 skrev O S <[email protected]>:
>>>>
>>>>> Hello all,
>>>>>
>>>>> I have an Ecowitt soil temperature sensor that is being picked up by
>>>>> the gateway (GW1200), but not by WeeWX (not on the report page, anyway).
>>>>>
>>>>> I am running WeeWX on a R-Pi 1, Debian Bookworm.
>>>>>
>>>>> Log is here: https://pastebin.com/Z26g3Xic with debug set to 1. The
>>>>> only changes I have made is to override some values and plots to exclude
>>>>> them from the html report page (Seasons).
>>>>>
>>>>> I have absolutely no idea where to start with this, so help from you
>>>>> people would be much appreciated, as usual.
>>>>>
>>>>> Thanks :)
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> To view this discussion visit
>>>>> https://groups.google.com/d/msgid/weewx-user/12f358fe-7d1a-45e0-8428-cccfc162e0f0n%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/12f358fe-7d1a-45e0-8428-cccfc162e0f0n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/c2236e80-ab57-4df1-851c-a82ded053165n%40googlegroups.com.
