A couple of things I noticed.
1. The archive period is 60 seconds (set via hardware). So all of the processing on an archive interval has to happen in less than 60 seconds or things are going to start to back up. 2. According to a the debug log output, there is a small number of fields. So there may be XType fields (such as appTemp) that need to be calculated every archive period. -rich On Saturday, 27 June 2026 at 15:03:18 UTC-4 [email protected] wrote: > > MySQL server. You had a "Cannot connect" error on startup, so there is > something flaky about the connection. > > It seems weewx starts up earlier than mysql, and thus fails to connect. > It also seems to shut down earlier (on system shutdown or reboot) than > mysql, leading to errors then. > > Enabling the general query log and following it doesn't show anything > obvious. Nothing gets logged to the slow query log. > > Trying to rule out sources of a slowdown, I moved the VM storage to a > local disk (it had been over the network), and again rebooted. And it now > quickly generates the index.html page for the Seasons report, but it still > seems to be struggling to create the charts: > dan@wxbox ➜ weewx ll > total 324K > -rw-r--r-- 1 weewx weewx 12K Jun 27 14:53 celestial.html > -rw-r--r-- 1 weewx weewx 8.5K Jun 24 07:59 daybarometer.png > -rw-r--r-- 1 weewx weewx 7.2K Jun 24 08:45 dayET.png > -rw-r--r-- 1 weewx weewx 8.1K Jun 24 08:04 dayhumin.png > -rw-r--r-- 1 weewx weewx 7.7K Jun 24 08:01 dayhum.png > -rw-r--r-- 1 weewx weewx 6.5K Jun 24 08:30 dayrain.png > -rw-r--r-- 1 weewx weewx 7.7K Jun 24 08:47 dayrx.png > -rw-r--r-- 1 weewx weewx 11K Jun 24 08:00 daytempdew.png > -rw-r--r-- 1 weewx weewx 9.5K Jun 24 08:01 daytempfeel.png > -rw-r--r-- 1 weewx weewx 7.8K Jun 24 08:02 daytempin.png > -rw-r--r-- 1 weewx weewx 7.6K Jun 24 08:48 dayvolt.png > -rw-r--r-- 1 weewx weewx 7.5K Jun 24 08:31 daywinddir.png > -rw-r--r-- 1 weewx weewx 8.6K Jun 24 08:31 daywind.png > -rw-r--r-- 1 weewx weewx 8.2K Jun 24 08:32 daywindvec.png > -rw-rw-r-- 1 weewx weewx 1.2K Jun 27 14:42 favicon.ico > drwxr-sr-x 2 weewx weewx 4.0K Jun 24 05:24 font > -rw-r--r-- 1 weewx weewx 29K Jun 27 14:48 index.html > drwxrwsr-x 8 dan weewx 4.0K Jun 24 05:22 meteo > drwxr-sr-x 2 weewx weewx 4.0K Jun 24 05:24 mobile > drwxr-sr-x 5 weewx weewx 4.0K Jun 24 05:25 new-belchertown > drwxr-sr-x 2 weewx weewx 4.0K Jun 27 14:44 NOAA > -rw-r--r-- 1 weewx weewx 9.7K Jun 24 07:57 rss.xml > -rw-rw-r-- 1 weewx weewx 5.3K Jun 27 14:42 seasons.css > -rw-rw-r-- 1 weewx weewx 6.3K Jun 27 14:42 seasons.js > drwxr-sr-x 3 weewx weewx 4.0K Jun 24 05:24 smartphone > -rw-r--r-- 1 weewx weewx 23K Jun 27 14:49 statistics.html > -rw-r--r-- 1 weewx weewx 7.9K Jun 27 14:53 tabular.html > -rw-r--r-- 1 weewx weewx 11K Jun 27 14:53 telemetry.html > -rw-r--r-- 1 weewx weewx 9.6K Jun 24 10:12 weekbarometer.png > -rw-r--r-- 1 weewx weewx 8.0K Jun 24 05:16 weekhum.png > -rw-r--r-- 1 weewx weewx 11K Jun 24 12:43 weektempdew.png > -rw-r--r-- 1 weewx weewx 10K Jun 24 02:42 weektempfeel.png > -rw-r--r-- 1 weewx weewx 7.9K Jun 24 03:50 weektempin.png > > > 'weectl debug --output=/tmp/something.txt' > > dan@wxbox ➜ weewx cat /tmp/something.txt > > System info > Platform: Linux-6.12.94+deb13-amd64-x86_64-with-glibc2.41 > Python Version: 3.13.5 > > Load Information > 1 minute load average: 2.76 > 5 minute load average: 2.21 > 15 minute load average: 1.41 > > General Weewx info > Weewx version 5.4.0 detected. > > Currently installed extensions > Extension Name Version Description > Me.teo 1.7.4 A modern, responsive web interface skin for > WeeWX. > crt 0.21 Emit a Cumulus realtime.txt for LOOP data. > meteotemplate 0.10 Upload weather data to Meteotemplate. > mqtt 0.23 Upload weather data to MQTT server. > neowx-material 1.11 The most versatile and modern weewx skin > new-belchertown 2.0 A clean, modern skin with real time streaming > updates and interactive charts. > owm 0.9 Upload weather data to OpenWeatherMap. > wcloud 0.12 Upload weather data to WeatherCloud. > > Archive info > Database name: weewx > Table name: archive > Version 4.0 > Unit system: 1 (US) > First good timestamp: 2015-07-15 10:27:24 EDT (1436970444) > Last good timestamp: 2026-06-27 14:58:00 EDT (1782586680) > Number of records: 4888980 > weewx (weewx.conf) is set to use an archive interval of 300 seconds. > The station hardware was not interrogated to determine the archive > interval. > > Supported SQL keys > dateTime usUnits interval > barometer pressure altimeter > inTemp outTemp inHumidity > outHumidity windSpeed windDir > windGust windGustDir rainRate > rain dewpoint windchill > heatindex ET radiation > UV extraTemp1 extraTemp2 > extraTemp3 soilTemp1 soilTemp2 > soilTemp3 soilTemp4 leafTemp1 > leafTemp2 extraHumid1 extraHumid2 > soilMoist1 soilMoist2 soilMoist3 > soilMoist4 leafWet1 leafWet2 > rxCheckPercent txBatteryStatus consBatteryVoltage > hail hailRate heatingTemp > heatingVoltage supplyVoltage referenceVoltage > windBatteryStatus rainBatteryStatus outTempBatteryStatus > inTempBatteryStatus sunshineDur > > Databases configured in weewx.conf: > archive_sqlite: > database_name weewx.sdb > driver weedb.sqlite > SQLITE_ROOT /var/lib/weewx > archive_mysql: > database_name weewx > driver weedb.mysql > host localhost > port 3306 > user weewx > password (redacted) > > --- Start configuration file /etc/weewx/weewx.conf --- > # WEEWX CONFIGURATION FILE > # > # Copyright (c) 2009-2024 Tom Keffer <[email protected]> > # See the file LICENSE.txt for your rights. > > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero. > debug = 1 > > # Whether to log successful operations. May get overridden below. > log_success = True > > # Whether to log unsuccessful operations. May get overridden below. > log_failure = True > > # This configuration file was created by ... > version = 5.4.0 > config_path = /etc/weewx/weewx.conf > WEEWX_ROOT = /etc/weewx > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Richmond Hill, GA" > > # Latitude and longitude in decimal degrees > latitude = 31.855 > longitude = -81.221 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 25, foot > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = Vantage > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > # If you have a website, you may specify an URL > station_url = XXXXXX > > > ############################################################################## > > [Vantage] > # This section is for the Davis Vantage series of weather stations. > > # Connection type: serial or ethernet > # serial (the classic VantagePro) > # ethernet (the WeatherLinkIP) > type = serial > > # If the connection type is serial, a port must be specified: > # Debian, Ubuntu, Redhat, Fedora, and SuSE: > # /dev/ttyUSB0 is a common USB port name > # /dev/ttyS0 is a common serial port name > # BSD: > # /dev/cuaU0 is a common serial port name > port = /dev/ttyUSB0 > > # If the connection type is ethernet, an IP Address/hostname is > required: > # host = 1.2.3.4 > > ###################################################### > # The rest of this section rarely needs any attention. > # You can safely leave it "as is." > ###################################################### > > # Serial baud rate (usually 19200) > baudrate = 19200 > > # TCP port (when using the WeatherLinkIP) > tcp_port = 22222 > > # TCP send delay (when using the WeatherLinkIP): > tcp_send_delay = 0.5 > > # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both > loop_request = 1 > > # The id of your ISS station (usually 1). If you use a wind meter > connected > # to a anemometer transmitter kit, use its id > iss_id = 1 > > # How long to wait for a response from the station before giving up (in > # seconds; must be greater than 2) > timeout = 4 > > # How long to wait before trying again (in seconds) > wait_before_retry = 1.2 > > # How many times to try before giving up: > max_tries = 4 > > # The driver to use: > driver = weewx.drivers.vantage > > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > # Uncomment and change to override logging for uploading services. > # log_success = True > # log_failure = True > > # [[WeatherCloud]] > # id = ff2b03be10f24998 > # key = (redacted) > > [[StationRegistry]] > # To register this weather station at weewx.com, set this to > true, and > # set option 'station_url', located in the [Station] section above. > register_this_station = False > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to post to AWEKAS, set the option 'enable' to true, > then > # specify a username and password. > # Use quotes around the password to guard against parsing errors. > enable = false > username = XXXXXX > password = XXXXXX > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to post to CWOP, set the option 'enable' to true, > # then specify the station ID (e.g., CW1234). > enable = false > station = XXXXXX > # If this is an APRS (radio amateur) station, specify the > # passcode (e.g., 12345). Otherwise, ignore. > passcode = XXXXXX > > [[PWSweather]] > # This section is for configuring posts to PWSweather.com. > > # If you wish to post to PWSweather.com, set the option 'enable' to > # true, then specify a station and password. > # Use quotes around the password to guard against parsing errors. > enable = false > station = XXXXXX > password = XXXXXX > > [[WOW]] > # This section is for configuring posts to WOW ( > wow.metoffice.gov.uk). > > # If you wish to post to WOW, set the option 'enable' to true, then > # specify a station and password. > # Use quotes around the password to guard against parsing errors. > enable = false > station = XXXXXX > password = XXXXXX > > [[WOW-BE]] > # This section is for configuring WeeWX to upload to WOW-BE ( > wow.meteo.be) > > # If you wish to post to WOW-BE, set the option 'enable' to true, > then > # specify a station and password. > # Use quotes around the password to guard against parsing errors. > enable = false > station = XXXXXX > password = XXXXXX > > [[Wunderground]] > # This section is for configuring posts to the Weather Underground. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station (e.g., 'KORHOODR3') and password. > enable = false > station = XXXXXX > password = XXXXXX > > # Set the following to True to have weewx use the WU "Rapidfire" > # protocol. Not all hardware can support it. See the User's Guide. > rapidfire = True > > # If you plan on using wunderfixer, set the following > # to your API key: > api_key = XXXXXX > > # [[Meteotemplate]] > # binding = loop > # password = (redacted) > # server_url = https://wx.familybrown.org/template/api.php > > # [[MQTT]] > # server_url = mqtt://kotori:*@192.168.1.68:1883/ > # server_url = mqtt://weewx:*@192.168.1.75:1883/ > # server_url = mqtt://mqtt:*@192.168.1.75:1883/ > # topic = > weewx/55b46cf0-bc22-4c2b-b67e-b866b0811234/RichmondHill/VantagePro2 > # topic = homeassistant/weewx > # retain = True > # unit_system = US > > # [[OpenWeatherMap]] > # appid = (redacted) > # station_id = (redacted) > > > ############################################################################## > > # This section specifies what reports, using which skins, to generate. > > [StdReport] > > # Where the skins reside, relative to WEEWX_ROOT > SKIN_ROOT = skins > > # Where the generated reports should go, relative to WEEWX_ROOT > HTML_ROOT = /var/www/html/weewx > > # Uncomment and change to override logging for reports. > # log_success = True > # log_failure = True > > # The database binding indicates which data should be used in reports. > data_binding = wx_binding > > # Each of the following subsections defines a report that will be run. > # See the customizing guide to change the units, plot types and line > # colors, modify the fonts, display additional sensor data, and other > # customizations. Many of those changes can be made here by overriding > # parameters, or by modifying templates within the skin itself. > > [[SeasonsReport]] > # The SeasonsReport uses the 'Seasons' skin, which contains the > # images, templates and plots for the report. > skin = Seasons > enable = true > > [[SmartphoneReport]] > # The SmartphoneReport uses the 'Smartphone' skin, and the images > and > # files are placed in a dedicated subdirectory. > skin = Smartphone > enable = false > HTML_ROOT = /var/www/html/weewx/smartphone > > [[MobileReport]] > # The MobileReport uses the 'Mobile' skin, and the images and files > # are placed in a dedicated subdirectory. > skin = Mobile > enable = false > HTML_ROOT = /var/www/html/weewx/mobile > > [[StandardReport]] > # This is the old "Standard" skin. By default, it is not enabled. > skin = neowx-material > enable = false > HTML_ROOT = /var/www/html/weewx/std > > [[Me.teo]] > skin = me.teo > enable = false > HTML_ROOT = /var/www/html/weewx/meteo > HTML_SUBDIR = meteo > > [[new-belchertown]] > # See wiki for configuration help: > https://github.com/uajqq/weewx-belchertown-new/wiki > skin = new-belchertown > HTML_ROOT = /var/www/html/weewx/new-belchertown > enable = false > > [[[Extras]]] > > # ----- Core site branding and language ----- > # belchertown_locale = "auto" > # theme = "auto" > # theme_toggle_enabled = 1 > # site_title = "My Weather Website" > # logo_image = "" > # logo_image_dark = "" > # manifest_name = "My Weather Website" > # manifest_short_name = "MWW" > # googleAnalyticsId = "" > > # ----- Homepage ----- > # station_observations = "barometer", "dewpoint", > "outHumidity", "rainWithRainRate" > # aqi_enabled = 0 > # aqi_location_enabled = 0 > # almanac_extras = 1 > # align_solar_path = "transit" > # beaufort_category = 0 > # beaufort_category_gusts = 0 > # wind_compass_marker = "" > # wind_compass_source = "" > # back_to_top_button_enabled = 0 > # back_to_top_button_position = 0 > # back_to_top_button_opacity = 0.8 > > # ----- Radar and map display ----- > # radar_html = "" > # radar_html_dark = "" > # radar_width = 650 > # radar_height = 360 > # radar_marker = 0 > # radar_zoom = 8 > # radar_overlay = "radar" > # radar_rain = "default" > # radar_temp = "default" > # radar_wind = "default" > # aeris_map = 0 > > # ----- Charts ----- > # highcharts_enabled = 1 > # chart_page_show_all_button = 1 > # chart_page_default_chartgroup = "day" > # highcharts_homepage_chartgroup = "homepage" > # highcharts_decimal = "auto" > # highcharts_thousands = "auto" > > # ----- Live updates and MQTT ----- > # mqtt_websockets_enabled = 0 > # mqtt_websockets_host = "" > # mqtt_websockets_port = 1883 > # mqtt_websockets_ssl = 0 > # mqtt_websockets_topic = "" > # mqtt_websockets_username = "" > # mqtt_websockets_password = "" > # disconnect_live_website_visitor = 1800000 > > # ----- Page status and auto-refresh behavior ----- > # show_last_updated_alert = 0 > # last_updated_alert_threshold = 1800 > # webpage_autorefresh = 0 > # reload_hook_images = 0 > # reload_images_radar = 300 > # reload_images_hook_asi = -1 > # reload_images_hook_af = -1 > # reload_images_hook_as = -1 > # reload_images_hook_ac = -1 > > # ----- Forecast ----- > # forecast_enabled = 1 > # forecast_provider = "nws" > # forecast_api_id = "" > # forecast_api_secret = "" > # forecast_units = "us" > # forecast_interval_hours = 24 > # nws_station_id = "" > # forecast_lang = "en" > # forecast_stale = 3540 > # current_conditions_stale = 3540 > # forecast_aeris_use_metar = 1 > # forecast_alert_enabled = 0 > # forecast_alert_limit = 1 > # forecast_show_daily_forecast_link = 0 > # forecast_daily_forecast_link = "" > # forecast_show_humidity_dewpoint = 0 > # forecast_place = "" > # current_conditions = "obs" > # current_conditions_timestamp_enabled = 0 > > # ----- Earthquake options ----- > # earthquake_enabled = 0 > # earthquake_maxradiuskm = 1000 > # earthquake_stale = 10740 > # earthquake_server = USGS > # earthquake_minmag = 2 > > # ----- Social sharing and footer extras ----- > # facebook_enabled = 0 > # twitter_enabled = 0 > # social_share_html = "" > > # ----- Kiosk ----- > # pi_kiosk_bold = "false" > # pi_theme = "auto" > # radar_html_kiosk = "" > # radar_width_kiosk = 490 > # radar_height_kiosk = 362 > # mqtt_websockets_host_kiosk = "" > # mqtt_websockets_port_kiosk = "" > # mqtt_websockets_ssl_kiosk = "" > # forecast_interval_hours_kiosk = 24 > # aqi_enabled_kiosk = 0 > > # ----- Dev/debug options ----- > # belchertown_debug = 0 > # minify = 0 > > [[[Labels]]] > [[[[Generic]]]] > > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, set "enable" to "true", then fill out the > # next four lines. > # Use quotes around the password to guard against parsing errors. > enable = false > user = XXXXXX > password = XXXXXX > server = XXXXXX # The ftp server name, e.g, www.myserver.org > path = replace_me # The destination directory, e.g., /weather > > # Set to True for an FTP over TLS (FTPS) connection. Not all > servers > # support this. > secure_ftp = False > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/html/weewx > > # Most FTP servers use port 21. > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > [[RSYNC]] > # rsync'ing to a webserver is treated as just another report. > skin = Rsync > > # If you wish to use rsync, you must configure passwordless ssh > using > # public/private key authentication from the user account that > weewx > # runs to the user account on the remote machine where the files > # will be copied. > # > # If you wish to use rsync, set "enable" to "true", then > # fill out server, user, and path. > # The server should appear in your .ssh/config file. > # The user is the username used in the identity file. > # The path is the destination directory, such as > /var/www/html/weather. > # Be sure that the user has write permissions on the destination! > enable = false > server = XXXXXX > user = XXXXXX > path = replace_me > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/html/weewx > > # Rsync can be configured to remove files from the remote server if > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if > you > # make a mistake in the remote path, you could could > unintentionally > # cause unrelated files to be deleted. Set to 1 to enable remote > file > # deletion, zero to allow files to accumulate remotely. > delete = 0 > > # Options in the [[Defaults]] section below will apply to all reports. > # What follows are a few of the more popular options you may want to > # uncomment, then change. > [[Defaults]] > > # Which language to use for all reports. Not all skins support all > # languages. You can override this for individual reports. > lang = en > > # Which unit system to use for all reports. Choices are 'us', > 'metric', > # or 'metricwx'. You can override this for individual reports. > unit_system = us > > [[[Units]]] > > # Option "unit_system" above sets the general unit system, but > # overriding specific unit groups is possible. These are > popular > # choices. Uncomment and set as appropriate. The unit is > always > # in the singular, e.g., 'mile_per_hour', NOT 'miles_per_hour' > [[[[Groups]]]] > # group_altitude = meter # Options are > 'foot' or 'meter' > # group_pressure = mbar # Options are > 'inHg', 'mmHg', 'mbar', or 'hPa' > # group_rain = mm # Options are > 'inch', 'cm', or 'mm' > # group_rainrate = mm_per_hour # Options are > 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' > # group_temperature = degree_C # Options are > 'degree_C', 'degree_F', or 'degree_K' > # The following line is used to keep the above lines > indented > # properly. It can be ignored. > unused = unused > > # Uncommenting the following section frequently results in more > # attractive formatting of times and dates, but may not work in > # your locale. > [[[[TimeFormats]]]] > # day = %H:%M > # week = %H:%M on %A > # month = %d-%b-%Y %H:%M > # year = %d-%b-%Y %H:%M > # rainyear = %d-%b-%Y %H:%M > # current = %d-%b-%Y %H:%M > # ephem_day = %H:%M > # ephem_year = %d-%b-%Y %H:%M > # The following line is used to keep the above lines > indented > # properly. It can be ignored. > unused = unused > > [[[Labels]]] > # Users frequently change the labels for these observation > types. > [[[[Generic]]]] > # inHumidity = Inside Humidity > # inTemp = Inside Temperature > # outHumidity = Outside Humidity > # outTemp = Outside Temperature > # extraTemp1 = Temperature1 > # extraTemp2 = Temperature2 > # extraTemp3 = Temperature3 > # The following line is used to keep the above lines > indented > # properly. It can be ignored. > unused = unused > > > ############################################################################## > > # This service converts the unit system coming from the hardware to a > unit > # system in the database. > > [StdConvert] > > # The target_unit affects only the unit system in the database. Once > # chosen it cannot be changed without converting the entire database. > # Modification of target_unit after starting weewx will result in > # corrupt data - the database will contain a mix of US and METRIC data. > # > # The value of target_unit does not affect the unit system for > # reporting - reports can display US, Metric, or any combination of > units. > # > # In most cases, target_unit should be left as the default: US > # > # In particular, those migrating from a standard wview installation > # should use US since that is what the wview database contains. > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > pressure = 24, 34.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > rain = 0, 10, inch > > > ############################################################################## > > # This section controls the origin of derived values. > > [StdWXCalculate] > > [[Calculations]] > # How to calculate derived quantities. Possible values are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > altimeter = prefer_hardware > appTemp = prefer_hardware > barometer = prefer_hardware > cloudbase = prefer_hardware > dewpoint = prefer_hardware > ET = prefer_hardware > heatindex = prefer_hardware > humidex = prefer_hardware > inDewpoint = prefer_hardware > maxSolarRad = prefer_hardware > rainRate = prefer_hardware > windchill = prefer_hardware > windrun = prefer_hardware > > > ############################################################################## > > # For hardware that supports it, this section controls how often the > # onboard clock gets updated. > > [StdTimeSynch] > > # How often to check the weather station clock for drift (in seconds) > clock_check = 14400 > > # How much it can drift before we will correct it (in seconds) > max_drift = 5 > > > ############################################################################## > > # This section is for configuring the archive service. > > [StdArchive] > > # If the station hardware supports data logging then the archive > interval > # will be downloaded from the station. Otherwise, specify it (in > seconds). > archive_interval = 300 > > # If possible, new archive records are downloaded from the station > # hardware. If the hardware does not support this, then new archive > # records will be generated in software. > # Set the following to "software" to force software record generation. > record_generation = hardware > > # Whether to include LOOP data in hi/low statistics. > loop_hilo = True > > # Uncomment and change to override logging for archive operations. > # log_success = True > # log_failure = True > > # The data binding used to save archive records. > data_binding = wx_binding > > > ############################################################################## > > # This section binds a data store to a database. > > [DataBindings] > > [[wx_binding]] > # The database must match one of the sections in [Databases]. > # This is likely to be the only option you would want to change. > database = archive_mysql > # The name of the table within the database. > table_name = archive > # The manager handles aggregation of data for historical summaries. > manager = weewx.manager.DaySummaryManager > # The schema defines the structure of the database. > # It is *only* used when the database is created. > schema = weewx.schemas.wview_extended.schema > > > ############################################################################## > > # This section defines various databases. > > [Databases] > > # A SQLite database is simply a single file. > [[archive_sqlite]] > database_name = weewx.sdb > database_type = SQLite > > # MySQL > [[archive_mysql]] > database_name = weewx > database_type = MySQL > > > ############################################################################## > > # This section defines defaults for the different types of databases. > > [DatabaseTypes] > > # Defaults for SQLite databases. > [[SQLite]] > driver = weedb.sqlite > # Directory in which database files are located, relative to > WEEWX_ROOT > SQLITE_ROOT = /var/lib/weewx > > # Defaults for MySQL databases. > [[MySQL]] > driver = weedb.mysql > # The host where the database is located > host = localhost > # host = [fd7a:115c:a1e0::f] > port = 3306 > # host = 192.168.3.6 > # The user name for logging in to the host > user = XXXXXX > # The password for the user name > password = XXXXXX > > > ############################################################################## > > # This section configures the internal weewx engine. > > [Engine] > > # This section specifies which services should be run and in what > order. > [[Services]] > prep_services = weewx.engine.StdTimeSynch > data_services = , > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, > weewx.wxservices.StdWXCalculate > xtype_services = weewx.wxxtypes.StdWXXTypes, > weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, > weewx.wxxtypes.StdDelta > archive_services = weewx.engine.StdArchive > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdWOWBE, > weewx.restx.StdAWEKAS, user.wcloud.WeatherCloud, > user.meteotemplate.Meteotemplate > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > On Saturday, June 27, 2026 at 2:22:27 PM UTC-4 Vince Skahan wrote: > >> Tom - do all those DMPAFT messages look unusual to you ? Page timestamp >> is always the same and it's trying to catchup every time (???) >> >> Wondering if seeing the output of 'weectl debug >> --output=/tmp/something.txt' might explain the setup too... >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/281b068d-a155-45da-b82b-1f825f4e1afcn%40googlegroups.com.
