You may have one driver enabled at a time in any running weewx instance. You can install as many as you want as long as only one is set enable=true.
You ‘could’ run multiple instances of weewx, each with their own .conf file, as long as you use unique pathnames for your databases and html output directories. I’ve run 3-4 on a pi with no issues. Capacity and performance depends which model pi you have. A pi4 or pi5 easily can handle it. On Friday, July 10, 2026 at 3:18:25 PM UTC-7 Pete AndDebbie wrote: > I have a Rpi WeeWX station working 100% with my WeatherFlow Tempest > Station... > > I plan to try the Raddy L7 LoRa Weather station, soon. > > Matthew Wall has written a Driver for the Raddy L7 LoRa Station. > > My question is: Can I remark out the reference to the current WeatherFlow > Driver in WeeWX.conf...reboot Rpi and then install Mathews Driver for the > Raddy L7....and configure in WeeWX.conf ???? Any conflicts? I don't > think WeeWX is setup to listen to, two different Weather Stations at the > same time. How would WeeWX decide what Weather Station data to use - to > publish its single Web page? I only have one Rpi available at Yacht Club. > > I need a Wind Weather Station with ~800ft of Line of Site Range from the > end of the Dock (at the Yacht Club) to inside the Clubhouse where the > display unit will be. > Thanks! > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/fc0f0582-9d75-487e-a001-80c7181da9fen%40googlegroups.com.
