It's working. Somewhat amazed. Raddy L7 LoRa (long range - 915Mhz) Weather Station is ~1000 feet (end of Dock) to Yacht Club - clubhouse. It has good 'line of sight'. We put the Display Unit (receiver) on the inside Window (suction cup) of the clubhouse. It's using the YC's WiFi to send its weather data to both Weather Underground and WeatherCloud.net. Those are the (2) configuration choices offer by the Display Unit. We did have a big rainy/heavy thunderstorm Sunday morning (could not see the end of the dock through the rain...) Signal drop. Once weather improved (rain stopped) the Weather Station started to receive data again.
On Saturday, July 11, 2026 at 9:29:46 AM UTC-5 Pete AndDebbie wrote: > Thanks! Sounds like a go! > Will test Raddy L7 LoRa Weather Station "range" this weekend. > Claims 1.9 Miles (I doubt it) I need about 800' to end of the Dock at > Yacht Club to get a better Wind Reading for our Sailing Team! > -pete > On Friday, July 10, 2026 at 6:00:44 PM UTC-5 Vince Skahan wrote: > >> You may have one driver enabled at a time in any running weewx instance. >> You can install as many as you want as long as only one is set enable=true. >> >> You ‘could’ run multiple instances of weewx, each with their own .conf >> file, as long as you use unique pathnames for your databases and html >> output directories. I’ve run 3-4 on a pi with no issues. Capacity and >> performance depends which model pi you have. A pi4 or pi5 easily can handle >> it. >> >> On Friday, July 10, 2026 at 3:18:25 PM UTC-7 Pete AndDebbie wrote: >> >>> I have a Rpi WeeWX station working 100% with my WeatherFlow Tempest >>> Station... >>> >>> I plan to try the Raddy L7 LoRa Weather station, soon. >>> >>> Matthew Wall has written a Driver for the Raddy L7 LoRa Station. >>> >>> My question is: Can I remark out the reference to the current >>> WeatherFlow Driver in WeeWX.conf...reboot Rpi and then install Mathews >>> Driver for the Raddy L7....and configure in WeeWX.conf ???? Any >>> conflicts? I don't think WeeWX is setup to listen to, two different >>> Weather Stations at the same time. How would WeeWX decide what Weather >>> Station data to use - to publish its single Web page? I only have one Rpi >>> available at Yacht Club. >>> >>> I need a Wind Weather Station with ~800ft of Line of Site Range from the >>> end of the Dock (at the Yacht Club) to inside the Clubhouse where the >>> display unit will be. >>> Thanks! >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/a0669010-4938-4705-a916-464c4e5c35bbn%40googlegroups.com.
