Thanks! Sounds like a go! Will test Raddy L7 LoRa Weather Station "range" this weekend. Claims 1.9 Miles (I doubt it) I need about 800' to end of the Dock at Yacht Club to get a better Wind Reading for our Sailing Team! -pete On Friday, July 10, 2026 at 6:00:44 PM UTC-5 Vince Skahan wrote:
> You may have one driver enabled at a time in any running weewx instance. > You can install as many as you want as long as only one is set enable=true. > > You ‘could’ run multiple instances of weewx, each with their own .conf > file, as long as you use unique pathnames for your databases and html > output directories. I’ve run 3-4 on a pi with no issues. Capacity and > performance depends which model pi you have. A pi4 or pi5 easily can handle > it. > > On Friday, July 10, 2026 at 3:18:25 PM UTC-7 Pete AndDebbie wrote: > >> I have a Rpi WeeWX station working 100% with my WeatherFlow Tempest >> Station... >> >> I plan to try the Raddy L7 LoRa Weather station, soon. >> >> Matthew Wall has written a Driver for the Raddy L7 LoRa Station. >> >> My question is: Can I remark out the reference to the current >> WeatherFlow Driver in WeeWX.conf...reboot Rpi and then install Mathews >> Driver for the Raddy L7....and configure in WeeWX.conf ???? Any >> conflicts? I don't think WeeWX is setup to listen to, two different >> Weather Stations at the same time. How would WeeWX decide what Weather >> Station data to use - to publish its single Web page? I only have one Rpi >> available at Yacht Club. >> >> I need a Wind Weather Station with ~800ft of Line of Site Range from the >> end of the Dock (at the Yacht Club) to inside the Clubhouse where the >> display unit will be. >> Thanks! >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/c376e098-bd7a-4016-8cce-227109dcf129n%40googlegroups.com.
