Hi Bent, Bent Bagger wrote: > I have two soundcards, (from 'cat /proc/asound/cards') > > 0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI > Ensoniq AudioPCI ENS1371 at 0xa000, irq 18 > 1 [ICH5 ]: ICH4 - Intel ICH5 > Intel ICH5 with ALC655 at irq 19 > > I use card 0 for music and card 1 for VoIP. > > Wengophone will only list one card in the 'Audio Settings' pane - > albeit under two names: default and plughw. I have changed the default > card from 0 to 1 in my ~/-asoundrc file but to no awail. Why does this > not give the desired result? And why does it not list all installed > cards?
The straight ALSA back-end is still in development, and is still incomplete. In the "official" linux builds, we use the PortAudio back-end still. The ALSA back-end solves quite a few problems we've had with PortAudio, so once it is complete it will be the default. Current things missing in the ALSA back-end is support for severral sound cards. There's probably more, but that one covers your situation. The best advice would be to get the .tar.bz2 from openwengo.org or rebuild the software using PortAudio rather than the non-PortAudio ALSA back-end. If you could forward this information on to the packagers for your distro (and put them in contact wiith me, if you'd like) I'd appreciate it. Cheers, Dave. -- Dave Neary OpenWengo Community Development Manager Email: [EMAIL PROTECTED] Tel: +33 9 51 13 46 45 Mob: +33 6 28 09 73 11 _______________________________________________ Wengophone-devel mailing list [email protected] http://dev.openwengo.com/mailman/listinfo/wengophone-devel
