Hi Jeff,

Ciscoworks 2000 RWAN is a good package for monitoring Cisco Routers, beware
though it is a bit expensive.  I use CW2K Device Fault Manager to receive
alerts/notifications from all Cisco devices and WUG for a simple up/down
notification.

You could simply make the routers send SNMP traps and syslog messages to
your WUG server, then configure WUG to notify you as appropriate for each
threshold or alarm.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks,

Steve Busby
Information Technology Services
University of Nebraska Medical Center
985030 Nebraska Medical Center
[EMAIL PROTECTED]
402.559.9621

If Linux doesn't have the solution, you have the wrong problem.

***************University of Nebraska Medical Center E-mail Confidentiality
Disclaimer ***************
 The information in this e-mail is privileged and confidential, intended
only for the use of the addressee(s) above.
 Any unauthorized use or disclosure of this information is prohibited. If
you have received this e-mail by mistake
 please delete it and immediately contact the sender.


                                                                                       
                                                         
                      "Brady, Jeff"                                                    
                                                         
                      <[EMAIL PROTECTED]        To:       "'[EMAIL PROTECTED]'" 
<[EMAIL PROTECTED]>         
                      >                                 cc:                            
                                                         
                      Sent by:                          Subject:  [WhatsUp Forum] 
Monitoring Cisco router ERRORS                                
                      [EMAIL PROTECTED]                                                
                                                
                      pswitch.com                                                      
                                                         
                                                                                       
                                                         
                                                                                       
                                                         
                      06/04/2003 09:08 AM                                              
                                                         
                      Please respond to                                                
                                                         
                      WhatsUp_Forum                                                    
                                                         
                                                                                       
                                                         




Hi All,


Is anyone out there monitoring Cisco router errors?  We have over 100
routers, if one goes down the alarm goes off, no problem.  If one gets
errors on its port (from AT&T) but doesn't actually go down, the different
counters increment on the router but traffic isn't affected enough to stop
a ping.  This means the router stays "up" to WhatsUp Gold, but the location
starts slowing down and the more sensitive applications drop connections.


Is there any way in WhatsUp or any other application to sound an alarm or
something when a router sees interfaces errors like this?


Thanks,
Jeff B


                                            Jeffery S. Brady


                                            Network Engineer


                                            AAA Mid-Atlantic


                                           2040 Market Street


                                         Philadelphia, PA  19103


                                                   ??






Please visit http://www.ipswitch.com/support/mailing-lists.html 
to be removed from this list.

An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/

Reply via email to