That is true. Monitoring the physical
drives does create some performance hit. However, as CPUs have become more
powerful, this may be a mute point. But it is one to remember when reviewing
the items.
John Tolmachoff MCSE CSSA
Engineer/Consultant
eServices For You
www.eservicesforyou.com
-----Original Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Benedict, Jeff
Sent: Monday, July
21, 2003 2:30 PM
To:
'[EMAIL PROTECTED]'
Subject: RE: [WhatsUp Forum]
[WhatsUp_Forum DIGEST]
I have a question about diskperf that may
be out of the scope of this forum, but I've heard that diskperf takes some
performance away from the server and should not be run constantly. Is this
true, and if so, is there any other method to use?
---------------------------------------------
Jeff Benedict
Tech Services
Lan/Wan Support
228-214-5465
-----Original Message-----
From: Luz Berger
[mailto:[EMAIL PROTECTED]
Sent: Monday, July
21, 2003 11:14 AM
To:
[EMAIL PROTECTED]
Subject: RE: [WhatsUp Forum]
[WhatsUp_Forum DIGEST]
Yes, it will work for NT 4.0 as well. Just
download the NT4 version of SNMP4tpc (snmp4nt-std.exe). However, the OID's
will not likely be the same on all systems. I have seen several different ways
of naming the drives. The OID will be 1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.2.x where
x is the ASCII representation for whatever the drive is named within windows.
On my system, drive c is named 0 C: which
tranlates to 1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.2.48.32.67.58 I have also seen
Drive C:. You can find the correct OID values in the ldisklogicalDisk Table.
-----Original
Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Benedict, Jeff
Sent: Monday, July
21, 2003 4:23 PM
To:
'[EMAIL PROTECTED]'
Subject: RE: [WhatsUp Forum]
[WhatsUp_Forum DIGEST]
David, thanks for the insight. Will
this work for NT 4.0 as well?
---------------------------------------------
Jeff Benedict
Tech Services
Lan/Wan Support
228-214-5465
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: Monday, July
21, 2003 9:16 AM
To:
[EMAIL PROTECTED]
Cc:
[EMAIL PROTECTED]
Subject: Re: [WhatsUp Forum]
[WhatsUp_Forum DIGEST]
Hope this helps!
1.
on the server that you want to monitor the diskspace you must do the following:
type "diskperf -Y" and reboot. This enables disk performance
monitoring. Then you need to go to www.wtcs.org and download SNMP t4PC
(the windows 2000 version). Make sure to reboot before installing this on
your server.
2.
there are a bunch of mibs that come with SNMP t4PC that you can import using
the mibextra tool. You must shutdown WUG and all associated services
before doing this. However, I have included the OID associated with
diskspace monitoring below.
3.
Last, setup a service in WUG to monitor SNMP and you want to do the following:
OID
for C: drive on Windows 2000 = 1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.2.67.58
OID
for D: drive on Windows 2000 = 1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.2.68.58
check
for 80%
OID:
(see above)
Check
it for: Range of values
Low:
20
High:
100
check
for 90%
OID:
(see above)
Check
it for: Range of values
Low:
10
High:
100
check
for 95%
OID:
(see above)
Check
it for: Range of values
Low:
5
High:
100
Thank
you,
David Passantino
Systems Integration Manager, IT, Worldwide
Burson-Marsteller
[EMAIL PROTECTED]
|
|
[EMAIL PROTECTED]
(List Server)
Sent
by: [EMAIL PROTECTED]
07/21/2003 03:01 AM
Please
respond to WhatsUp_Forum
|
To:
cc:
Subject: [WhatsUp_Forum
DIGEST]
|
----------------------------------------------------------------------
From: "Mark Brody" <[EMAIL PROTECTED]>
Subject: [WhatsUp Forum] Disk Space monitoring
Date: Mon, 14 Jul 2003 08:45:03
-0700
Reply-To: [EMAIL PROTECTED]
Hello-
Is there an easy method to monitor disk space on Win2k machines?
Thanks in advance,
Mark
----------------------------------------------------------------------
Subject: RE: [WhatsUp Forum] Disk Space monitoring
Date: Mon, 14 Jul 2003 11:56:40
-0400
From: "Dana Smith" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
http://support.ipswitch.com/kb/WG-20001201-DM01.htm
Probably does what you want.=20
DS
-----Original Message-----
From: Mark Brody [mailto:[EMAIL PROTECTED]
Sent: Monday, July 14, 2003
11:45 AM
To: [EMAIL PROTECTED]
Subject: [WhatsUp Forum] Disk Space monitoring
Hello-
Is there an easy method to monitor disk space on Win2k machines?
Thanks in advance,
Mark
Please visit http://www.ipswitch.com/support/mailing-lists.html=20
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
=============================================
This transmission is confidential and intended
solely for the person or organization to whom
it is addressed. It may contain privileged and
confidential information. If you are not the
intended recipient, you should not copy,
distribute or take any action in reliance on it.
If you have received this transmission in error,
please notify the sender at the e-mail address above.
==============================================
|
