Nothing to do
with the post below but have a suggestion for the next version
maybe.
I would like
to be able to go to a map, click on a monitored server, select tools and be able
to use a remote desktop client connect to that server. What does anybody
else think?
Regards
Gary
Swanton,
MCSE
IT Systems
Support
IT Shared
Services, Village Roadshow Limited
C
Melbourne
- Bourke St
Level 3, 206
Bourke Street, Melbourne VIC 3000 PO Box 1411M, Melbourne VIC
3001
(+ 61 3 9667 6699
Facsimile +61 3 9639 7333 È0438
877 896
Melbourne
- Jam Factory
Level 1, 500
Chapel Street, South Yarra VIC 3141
Telephone + 61 3
9281 1012 Facsimile +61 3 9804 7349
Sydney
- Pyrmont
Level 4, 235
Pyrmont Street, Pyrmont NSW 2009 GPO Box 2581 Sydney
2001
Telephone + 61 2
9552 8777 Facsimile +61 2 9552 2510
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of parag chavan
Sent: Tuesday, 22 July 2003 1:12 PM
To: [EMAIL PROTECTED]
Subject: RE: [WhatsUp Forum] Cisco Router SNMP Configuration ?Dear MarkYes ,I am using Whats Up Gold 8.01. My querry is that I am able to receive a SNMP Trap from a cisco switch 2924 configurd and with the same configuration on Cisco router having IOS ver much latest than that of a switch I am not able to receive the trap in quickstatus.As said Surprisingly the traps in SNMP trap logs are captured and howcome in the quickstatus I could not get the same?Since the traps are not geting captured in quickstatus, I am not bale to to fire the alerts .I think any event will be fired only if it is seen in quickstatus.Pls help me.Thanks in advace.
Mark Symons <[EMAIL PROTECTED]> wrote:My guess is that you are using WhatsUp Gold v8.01.Dear
If so, then all traps show in the SNMP Log but only those that fire an Event will show in the Activity Log, and thus in your QuickStatus log.
Configure an Event on the approriate device(s) on the map. Perhaps start with "Any" just so that you can check that things are working OK. When you are happy that this is working you can fine tune and replace the Event "Any" with something a bit more specific.
Mark Symons
Ipswitch, Inc
Augusta GA
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of parag chavan
Sent: Monday, July 21, 2003 09:52
To: [EMAIL PROTECTED]
Subject: [WhatsUp Forum] Cisco Router SNMP Configuration ?
Hi all
I have cisco router which I am SNMP Monitoring.I am facing strange problem .In spite of enabling all SNMP Related parameters ,I am not able to see the snmp related log or traps in the quick status/log .However I could see the snmp traps in log-->SNMP Traps .
I thing becausef which it does not trigger the notification.What could be the issue? I HAVE CISCO IOS Ver. 12.1.I am sending herewith the configuration .Is it that I have missed out ?
Pls help me.
Thank in advance.
snmp-server community public RO
snmp-server community private RW
snmp-server trap link ietf
snmp-server trap-source FastEthernet0/1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps syslog
snmp-server host 172.29.5.1 public
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the Network Administrator on +61 3 9667 6699.
This footnote also confirms that this email message has been scanned
for the presence of computer viruses and inappropriate content.
