You run both. Just edit the following reg key: HKEY_LOCAL_MACHINE\SOFTWARE\Ipswitch\WhatsUp\Settings "CheckWUGService"=dword:00000000
Set it to '0' to not check for the service. Keep in mind that you will have to restart the service after making any changes to the maps. -----Original Message----- From: Mark_Raihl/MO/[EMAIL PROTECTED] [mailto:Mark_Raihl/MO/[EMAIL PROTECTED] Sent: Thursday, September 25, 2003 12:53 PM To: [EMAIL PROTECTED] Subject: RE: [WhatsUp Forum] terminal server I have worked with this for a couple of years. We use the service to bypass the issue....but there is the other caviat...you cannot have the console up and running with the service running hence no map manipulation can take place. You have to pick. Mark Raihl Enterprise Management American Century "Dan King" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> cc: Sent by: Subject: RE: [WhatsUp Forum] terminal server [EMAIL PROTECTED] .ipswitch.com 09/25/2003 02:35 PM Please respond to WhatsUp_Forum My only bad experience has been this: We leave WUG running at the console of our server. Occasionally, if I need to reboot the server remotely, I cannot launch WUG at the console due to no remote control software being installed, only Terminal Services. So I connect via TS and launch it there. This allows everything to work fine, and I leave the terminal session logged in. But the next day we get to the office, we log in the computer and start WUG again, so we can view it on screen. So at this point we have it running 2 times, 1 at the console and 1 in the terminal session. If we kill the WUG application running on the Terminal Server session, the web server stops working. So we have to close and open WUG at the console to get the web interface back up. My guess is we will not have this problem once we set it to run as a service. Dan King - MCSE, CCNA, CNE Systems Administrator [EMAIL PROTECTED] -----Original Message----- From: Glatt, Robert [mailto:[EMAIL PROTECTED] Sent: Thursday, September 25, 2003 5:09 AM To: wug (E-mail) Subject: [WhatsUp Forum] terminal server Has anyone had any bad experience using terminal server on the WUG box?? Was thinking of using it to be able to use Terminal Service as a client to the console. Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ ----------------------------------------- CONFIDENTIALITY NOTICE: This e-mail, and any attachments, are intended solely for the use of the intended recipient and may contain information that is confidential, proprietary, copyrighted and/or legally privileged. Any unauthorized disclosure, distribution, or use of this information is prohibited. If you are not the intended recipient, and have received this message in error, please notify the sender immediately by reply e-mail and destroy all copies of the original message and any attachments. Your compliance is appreciated. Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
