Looked at that option, but found that with the number of devices and the
way we are currently handling external notifications, remembering 'state'
is key. Dump the service and you re-alert on everything it has already
alerted on. Unless there is a caviat to know about.
Mark Raihl
Enterprise Management
American Century
"Chris Ohm"
<[EMAIL PROTECTED]> To: <[EMAIL
PROTECTED]>
cc:
Sent by: Subject: RE: [WhatsUp Forum]
terminal server
[EMAIL PROTECTED]
.ipswitch.com
09/25/2003 03:19 PM
Please respond to
WhatsUp_Forum
You run both. Just edit the following reg key:
HKEY_LOCAL_MACHINE\SOFTWARE\Ipswitch\WhatsUp\Settings
"CheckWUGService"=dword:00000000
Set it to '0' to not check for the service.
Keep in mind that you will have to restart the service after making any
changes to the maps.
-----Original Message-----
From: Mark_Raihl/MO/[EMAIL PROTECTED]
[mailto:Mark_Raihl/MO/[EMAIL PROTECTED]
Sent: Thursday, September 25, 2003 12:53 PM
To: [EMAIL PROTECTED]
Subject: RE: [WhatsUp Forum] terminal server
I have worked with this for a couple of years. We use the service to
bypass the issue....but there is the other caviat...you cannot have the
console up and running with the service running hence no map
manipulation
can take place. You have to pick.
Mark Raihl
Enterprise Management
American Century
"Dan King"
<[EMAIL PROTECTED]> To:
<[EMAIL PROTECTED]>
cc:
Sent by: Subject: RE:
[WhatsUp Forum] terminal server
[EMAIL PROTECTED]
.ipswitch.com
09/25/2003 02:35 PM
Please respond to
WhatsUp_Forum
My only bad experience has been this:
We leave WUG running at the console of our server. Occasionally, if I
need to reboot the server remotely, I cannot launch WUG at the console
due to no remote control software being installed, only Terminal
Services. So I connect via TS and launch it there. This allows
everything to work fine, and I leave the terminal session logged in. But
the next day we get to the office, we log in the computer and start WUG
again, so we can view it on screen. So at this point we have it running
2 times, 1 at the console and 1 in the terminal session. If we kill the
WUG application running on the Terminal Server session, the web server
stops working. So we have to close and open WUG at the console to get
the web interface back up.
My guess is we will not have this problem once we set it to run as a
service.
Dan King - MCSE, CCNA, CNE
Systems Administrator
[EMAIL PROTECTED]
-----Original Message-----
From: Glatt, Robert [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 25, 2003 5:09 AM
To: wug (E-mail)
Subject: [WhatsUp Forum] terminal server
Has anyone had any bad experience using terminal server on the WUG box??
Was
thinking of using it to be able to use Terminal Service as a client to
the
console.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
-----------------------------------------
CONFIDENTIALITY NOTICE: This e-mail, and any attachments, are intended
solely for the use of the intended recipient and may contain information
that is confidential, proprietary, copyrighted and/or legally privileged.
Any unauthorized disclosure, distribution, or use of this information is
prohibited. If you are not the intended recipient, and have received this
message in error, please notify the sender immediately by reply e-mail and
destroy all copies of the original message and any attachments. Your
compliance is appreciated.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
