Most of my maps are physical layouts of racks or desks, so multiple icons don't realy work for me. I currently have one map with all the special alerts on it. It works for me because the amount is small. I would create more maps if I needed, and group then by who needed to see them.
If I had servers with lots of these I may create one map per server. That way I could do denpendencies. -----Original Message----- >From: "Finbom Magnus" <[EMAIL PROTECTED]> >Sent: 7/28/04 10:59:57 PM >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> >Subject: SV: [WhatsUp Forum] Alerts to different destinations? > >That's was just what I thought. Not wery goog looking and maybe a bit more >harder to administrate when getting doubble of many devices. How has the >rest of you solved this practical? Are the "extra" devices on their own map? > > >Regards, Magnus Finbom > > >-----Ursprungligt meddelande----- >Fr�n: Mark Symons [mailto:[EMAIL PROTECTED] >Skickat: den 28 juli 2004 15:54 >Till: [EMAIL PROTECTED] >�mne: RE: [WhatsUp Forum] Alerts to different destinations? > > >Finbom wrote: > >> My wish: >> To separate the service alerts so they are sent to >> another destination. >> So that when the server goes down, everyone is alerted. >> But when a monitored service fails only a few are alerted. > >The way to do this in v8.0x is to create a coy of the device on your map. >On one copy you just monitor the device itself and configure the alert that >goes to everyone. On the other copy you monitor the service and configure >the alert that only goes to a few people. > >Mark Symons >Ipswitch, Inc >Augusta GA > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Finbom Magnus >Sent: Wednesday, July 28, 2004 03:59 >To: '[EMAIL PROTECTED]' >Subject: [WhatsUp Forum] Alerts to different destinations? > > >Hi! > >Is this possible? > >Scenario: >I have my WUG to monitor up/down-state on a server. WUG is also monitoring >some services. And when the server goes down or a service fails an alert is >sent. > >My wish: >To separate the service alerts so they are sent to another destination. So >that when the server goes down, everyone is alerted. But when a monitored >service fails only a few are alerted. > >I know how to setup filter out events and choose where the alert will be >sent. But when it comes to "monitor and services" all alarms are sent >together. > >Can it be done? Hope you understand. > > >Best regards >Magnus Finbom >IT-Engineer(Microsoft MCP, MCP+I, MCSE-NT4) >Lansforsakringar Skaraborg >Bank and Insurance >Radhusgatan 8 >54129 Skovde >Sweden >phone 0500 77 70 65, gsm 0708 71 70 60, fax 0500 77 70 30 >[EMAIL PROTECTED] >http://www.lansforsakringar.se/skaraborg > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > > >Please visit http:??//www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > >An Archive of this list is available at: >http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
<<winmail.dat>>
