I second that. We have school districts up in Alaska that shut their equipment down in the summer time. In WUG 8 all we did was put it in inactive mode-all greyed out. We like the feature of this so our map isnt full of alarms or in WUP, all orange full of maintaince modes. Can we please get this added?
-----Original Message----- From: Jeff Cook To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: 11/15/2004 7:29 PM Subject: RE: [WhatsUp Forum] WUP Status But then it shows as being in maintenance. What if I have a device that I want to show on my maps (like a fax), but I can't monitor it. I want it on the map, so I can track the fax number, the model number and even what toner it uses. However I don't want it monitored, and I don't want any status at all to show in the map, or in upper level maps. In WUG I could just turn off monitoring of the device. I also set the color for status inactive (unmonitored) to white with a very small box. Was the inactive/unmonitored state removed in WUP? If so why. I would say that I have 20% of my devices in WUG set as inactive. I really like the idea of maintenance, but not at the loss of inactive. Thank You Jeff Cook Network Administrator Whatcom Educational Credit Union -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Saturday, November 13, 2004 8:07 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [WhatsUp Forum] WUP Status Jeff, Sounds like you have a device with no active monitors (device is gray and status is unknown). You could put the device into maintenance mode: Device Properties>Polling>Maintenance>Force this device.... I'm not sure what affect leaving something with an unknown status does to your reports, but I do know Maintenance mode is accounted for properly. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Thanks, Steve Busby Information Technology Services University of Nebraska Medical Center 985030 Nebraska Medical Center [EMAIL PROTECTED] 402.559.9621 If Linux doesn't have the solution, you have the wrong problem. ***************University of Nebraska Medical Center E-mail Confidentiality Disclaimer *************** The information in this e-mail is privileged and confidential, intended only for the use of the addressee(s) above. Any unauthorized use or disclosure of this information is prohibited. If you have received this e-mail by mistake please delete it and immediately contact the sender. "Jeff Cook" Sent by: <[EMAIL PROTECTED]> WhatsUp_Forum-own cc [EMAIL PROTECTED] com Subject [WhatsUp Forum] WUP Status 11/12/04 08:01 PM Please respond to [EMAIL PROTECTED] t.ipswitch.com In WUG you would set a device to be unmonitored. How do you do this in WUP? I see a status of unknown, but in WUG there was also a status of inactive. Thank You Jeff Cook Network Administrator Whatcom Educational Credit Union Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
