Hi,
I want to proactively monitor Physical Drive Failure Status in all my Compaq servers and A notification should be generated from WUG if there is any Phy.Drive failures in servers.
I am planning to add event from "Event Library->SNMP Trap->cpqCrPhyDiskFailureTrap" to all compaq servers.
Will this notify me if there is any failure / status change in the Physical disk drives?
I found the following entry in One of my compaq server's System Event log. But, I can not see all server's Event logs all the time.So, I want this to be notified by WUG.
Could some one help me out from this problem? Pls revert back if any other details are required
Thanks,
Kumar.
---------------------------------------------------
Event Type: Error
Event Source: Storage Agents
Event Category: Events
Event ID: 1064
Date: 10/20/2004
Time: 9:10:20 PM
User: N/A
Computer: ABCDComp1
Description:
Drive Array Physical Drive Status Change. The physical drive in slot 1, port 1, bay 0 with serial number "3BT1HFB0000021120646", has a new status of 3.
(Drive status values: 1=other, 2=ok, 3=failed, 4=predictiveFailure)
[SNMP TRAP: 3029 in CPQIDA.MIB]
Description:
Drive Array Logical Drive Status Change. Logical drive number 1 on the array controller in slot 1 has a new status of 7.
(Logical Drive status values: 1=other, 2=ok, 3=failed, 4=unconfigured, 5=recovering, 6=readyForRebuild, 7=rebuilding, 8=wrongDrive, 9=badConnect, 10=overheating, 11=shutdown, 12=expanding, 13=notAvailable, 14=queuedForExpansion)
[SNMP TRAP: 3008 in CPQIDA.MIB]
---------------------------------------------------
--
_______________________________________________
India.com free e-mail - www.india.com
Check out our value-added Premium features, such as an extra 20MB for mail storage, POP3, e-mail forwarding, and ads-free mailboxes!
Powered by Outblaze
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
