I've found the condition "<%IF% IS_CONFIGURE_REPORTS_ENABLED>" in 2 files topview.asp and mapdetails.asp in \Program Files\WhatsUp\Web folder. So you need to block users with this condition in topview.asp:
1) Open topview.asp in notepad 2) after "<%IF% IS_CONFIGURE_REPORTS_ENABLED>" add one more condition, for instance, - type one more line: <%IF% IS_USER_CONFIGURE_USERS> 3) add one more <%ENDIF%> right after the "<A href="ReportPerformanceGraphs.asp">Performance Graphs</A></TD></TR></TABLE>" line. 4) save file Done. In top view users with the "Configure Reports" privelege but without "Configure Users" cannot access "Recurring Notifications" option. You can always restore default WhatsUp web interface with original files from the \Program Files\WhatsUp\WebTemplateArchive\Classic folder. Good luck, Oleg --- Arsenault Dan <[EMAIL PROTECTED]> wrote: > I am using WUG V8.03HF2 and I am allowing our end > users to view the web > interface with the ability to "Access Tools" and > "Access Full Log". I > also wanted to give them access to the statistics > and outage reports, > but when I do this, they also have the ability to > reconfigure the > recurring reports. Having them reconfigure the > recurring reports is a > non-option for me. Is there a way to just give them > access to the stats > and outage reports? > > The setup is pretty simple. There is one map with > 25 sub-maps, each > representing a location in North America. Each of > them is a single map. > I am using the .ini file format for the maps. I am > using the web server > as is, out of the box and have not "customized" it > with anything beyond > what the program automagically set up. > > Any advice would be appreciated. > > I'm not ready to make the plunge to WUP from all > that I have read so far > on the list. > > Thanks, Dan . . . > > > Dan Arsenault > Network Administrator > Siemens VDO Automotive Inc. > 700 Park Avenue East > Chatham, Ontario, Canada > Voice: 519-436-3839 > Fax: 519-436-3641 > Email: [EMAIL PROTECTED] > > The message is intended only for the use of the > intended recipient(s). > It is confidential and may also be privileged and/or > exempt from > disclosure under applicable law. If you are not the > intended > recipient(s), you are hereby notified that any > review, retransmission, > conversion to hard copy, copying, circulation or > other use of this > message is strictly prohibited and may be illegal. > If you are not the > intended recipient(s), or have received this message > in error, please > notify the sender immediately by return E-mail and > delete this message. > > > > > ________________________________ > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of > [EMAIL PROTECTED] > Sent: Tuesday, January 25, 2005 12:24 PM > To: [email protected] > Subject: RE: [WhatsUp Forum] Occasional Missed > Checks.... > > > > > > ________________________________ > > " I've tried changing the down to down for 2 > minutes. That only > triggers an UP alert after it sees the device as > down. I don't get the > alert for down but I get an alert for UP. > > What I did in WUG was to change the poll to use > services instead of > ICMP. That worked great and I was able to see that > the system was up > except when it could not get to the service (HTTP, > FTP, Exchange, etc.). > > I can't seem to find that option in WUP 2005. " > > > I raised this issue in a previous post. An Ipswitch > rep on this > forum stated that they are aware of the issue that > even when you > increase the trigger to 2 or 5 minutes an Up alert > is still sent. She > said that this was being addressed in service pack 1 > due this first > quarter. > > Regarding polling services instead of ICMP, this is > easy! First > double click your device (or right click/properties) > and select the > "Active Monitors" tab in the window. This is the > same as the old > services in WUG. Click add and add the service you > wish to poll. You can > configure each one and associated alerts/actions > independently from each > other. > > If the service you want is not there you can create > your own by > selcting "Active Monitor Library" in the configure > menu on the tool bar > at the top. > > Nonetheless, going back to the start of this > thread, changing > the service type will not help the amount of missed > checks you will get > as I have been there and tried that and we still get > loads. > I have ran WUP and WUG on the same server and on > different > servers for comparison and we still get excessive > misses for the same > checks in WUP relative to WUG. We are finding that > this product is > causing more tech support overhead than from not > having any monitoring > at all. If SP1 doesnt fix these issues then WUP will > be in the trash > very soon. > > I suspect that the polls are not even leaving the > host server at > all. When I have some free time I may set up some > packet tracing to try > and discover why this annoying problem is occuring. > > > > ************************************************************************ > *********** > Gold Medal Travel E Mail disclaimer > > This e-mail contains proprietary information some or > all of which may > be legally privileged. It is for the intended > recipient only. If an > addressing or transmission error has misdirected > this e-mail, please > notify the author by replying to this e-mail. If you > are not the > intended recipient you must not use, disclose, > distribute, copy, print > or > rely on this e-mail. > ************************************************************************ > *********** > > __________________________________ Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250 Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
