Hi Gui, you are right: IPv6 on olsr1 is no longer active on the majority of node that supported it earlier this year (or last year). Anyway, as far as I know the tunnel service "6in4" is still active, thus: as long as you are able to find a path on IPv6@olsr1, you might be lucky to get online.
As of know, IPv6 is delivered by olsr2, as you already discovered on your own *thumbsup*. To get a clear view on what nodes support IPv6@olsr2, you can investigate the olsrv2info output or just look at these 2 links: http://ff.cybercomm.at/monitor/olsr2.php http://ff.cybercomm.at/map2/ For some reason, not all routers running olsr2 are reachable via IPv6. As far as we found out, this is related to the setting "WDS bridge" on Ubiquiti-Antennas running AirOS 6 or earlier (with must be enabled). So in case there's a node listed in the "olsr2 cloud", a missing WDS-bridge-enabled setting could cause that the node is not available (highlighted blue in the listing and map). Also, some nodes running olsr2 do not have a connection to the rest of the olsr2-could. That means, they are isolated without the uplink node broadcasting the default routes to ::0. Looks like gri102 is such a node :-( Recently I discovered also an issue related to the versions of olsrd2 daemon (oonf): most of the routers use version 0.13.0, which does not seam to work properly together with the most actual version 0.14.1: updating a node from 0.13.0 to 0.14.1 will isolate it. Details see this github issue: https://github.com/OLSR/OONF/issues/10 I hope this helps to explain the situation. To solve this for you, I propose to get in contact with the node owner/tech-c of gri106 and his/her uplink-partner. Stein712 has node-id=2843, that is 0xb1b. Your node's IPv6 user block therefore is: 2a02:61:b1b::/48. See further details on IP-Addresses here: https://wiki.funkfeuer.at/wiki/IP-Adresskonzept Regards, Christian -----Ursprüngliche Nachricht----- Von: Wien [mailto:[email protected]] Im Auftrag von Gui Iribarren Gesendet: Donnerstag, 10. August 2017 21:46 An: [email protected] Betreff: [Wien] ipv6 with olsrd2? Hello fellow funkfeuers, i'm trying to get native ipv6 connectivity in stein712 https://map.funkfeuer.at/wien/#shownode=stein712 currently doing olsr1 (v4) with gri102 that has been providing wonderful connectivity for almost a year already so i just tried to do also olsr1 (v6), without success looking at a tcpdump, i saw olsr2 packets coming from gri102 so i installed olsr2 on my side, made a trivial config based on http://www.olsr.org/mediawiki/index.php/OLSR_network_deployments#olsrd2_2 and i get only 3 routes: 2a02:61:831::1 2a02:61:a5b::1 2a02:61:b65::1 and, especially, no default route is this just an isolated test olsr2 mesh? maybe something wrong in my (trivial) config? what's the current level of implementation of ipv6 across funkfeuer? how do i get an ipv6 range assigned to my stein712? as always, i offer my help in whatever needed to push ipv6 implementation forward :) thanks! gui -- Wien mailing list [email protected] https://lists.funkfeuer.at/mailman/listinfo/wien -- Wien mailing list [email protected] https://lists.funkfeuer.at/mailman/listinfo/wien
