Dan,
I thought the "/etc/init.d/wimax {start|stop|status}" command was how you run
it manually. Or am I mistaken?
-Brandon
--- On Wed, 11/18/09, Dan Williams <[email protected]> wrote:
From: Dan Williams <[email protected]>
Subject: Re: Intel 5350 Firmware Download Issue
To: "Brandon Dell" <[email protected]>
Cc: "Inaky Perez-Gonzalez" <[email protected]>, [email protected]
Date: Wednesday, November 18, 2009, 4:27 PM
> On Wed, 2009-11-18 at 11:47 -0800, Brandon Dell wrote:
> Hi,
> So as I last mentioned I am able to see the "wmx0" interface when I type
>ifconfig. Now I have run into a new issue. I installed the Intel Binary
>Supplicant and Network Service. However when I enter "/etc/init.d/wimax
>start" the service starts up then stops running after a few seconds. Without
>this daemon running I cannot issue any wimaxcu commands.
>
> Any ideas?
Have you tried running the service manually to find out why it's quitting?
Dan
> Thanks,
> Brandon
>
> --- On Wed, 11/18/09, Brandon Dell <[email protected]> wrote:
>
>
> From: Brandon Dell <[email protected]>
> Subject: Re: Intel 5350 Firmware Download Issue
> To: "Jerone Young" <[email protected]>, "Inaky
>Perez-Gonzalez" <[email protected]>
> Cc: [email protected]
> Date: Wednesday, November 18, 2009, 7:14 AM
>
> Hi all,
> Yesterday I rebuilt my kernel using 2.6.29 from kernel.org and the card is
>being recognized now. I am going to investigate what differences, if any,
>there are between 2.6.29 and 2.6.31.
>
> Thanks for all you guys' help,
> Brandon
>
> --- On Tue, 11/17/09, Inaky Perez-Gonzalez <[email protected]> wrote:
>
>
> From: Inaky Perez-Gonzalez <[email protected]>
> Subject: Re: Intel 5350 Firmware Download Issue
> To: "Jerone Young" <[email protected]>
> Cc: "Brandon Dell" <[email protected]>, [email protected]
> Date: Tuesday, November 17, 2009, 5:48 PM
>
> On Tue, 2009-11-17 at 14:56 -0600, Jerone Young wrote:
> > Are you testing with kernels 2.6.31 & greater? Apparently according
>to
> > Kevin it works with 2.6.30 & below.
>
> Yeap, I do. my tree is in 2.6.32-rc3
>
>
>
>
>
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> wimax mailing list
> [email protected]
> http://lists.linuxwimax.org/listinfo/wimax
>
> >
> > _______________________________________________
> > wimax mailing list
> > [email protected]
> > http://lists.linuxwimax.org/listinfo/wimax
_______________________________________________
wimax mailing list
[email protected]
http://lists.linuxwimax.org/listinfo/wimax
