Hello All -
I'm wondering if it's possible to change the Idle Timer on the device.
Currently my device will go idle if there's no data for roughly 7 seconds which
causes noticeable lag when my next packet goes out (roughly 2000 ms minus maybe
150 for the rtt). I did manage to turn off power saving mode in
/etc/wimax/config.xml by setting <PowerSaveEnable>0</PowerSaveEnable> but this
did not help the issue. When the card goes idle this is what the Wimaxd.log
shows:
03:00:35: 1544275712 @Notice @ACT @Act_MessagesHandler(IN).
pdwResponseMessageID=1544273304 [Act_MessagesHandler]
@Act.c (518)
@wimaxd03:00:35: 1544275712 @Notice @ACT
@Act_MessagesHandler(IN). dwSentMessageID=6 [Act_MessagesHandler]
@Act.c
(524) @wimaxd03:00:35: 1544275712 @Notice @ACT @Got
L4_PROXY_OPCODE_L4_INDICATION_ARRIVED message [Act_MessagesHandler]
@Act.c
(540) @wimaxd03:00:35: 1544275712 @Notice @ACT @Got system
state report. system state=9 , isL5DispatcherOpen=1 [Act_MessagesHandler]
@Act.c
(559) @wimaxd03:00:35: 1544275712 @Notice @NDNS_Agent
@NDnSAgent_SystemStateUpdate: SystemState=Idle, ConnectState=NotApplicable,
swRf=1, hwRf=1 [NDnSAgent_SystemStateUpdate]
@NDnSAgent_CBs.c (216) @wimaxd03:00:35: 1544275712 @Notice @NDNS_Agent
@L4C_SetControllerModeEx(IN): systemStateUpdate=Idle, swRfStatus=1,
hwRfStatus=1 [L4C_SetControllerModeEx]
@NDnSAgent.c (1356) @wimaxd03:00:35: 1544275712 @Notice @NDNS_Agent
@L4C_SetControllerModeEx. systemState=10 [L4C_SetControllerModeEx]
@NDnSAgent.c (1392) @wimaxd03:00:35: 1544275712 @Notice @NDNS_Agent
@Handling DataPathConnected system state. Current state=10, previous state=9
[L4C_HandleDataPathConnected]
@NDnSAgent.c (1080) @wimaxd03:00:35: 1544275712 @Notice @NDNS_Agent
@L4C_SetControllerModeEx(OUT): status=0 [L4C_SetControllerModeEx]
@NDnSAgent.c (1527) @wimaxd
Thank you,
-Ted
_______________________________________________
wimax mailing list
[email protected]
http://lists.linuxwimax.org/listinfo/wimax
