On 30 Dec 2005 at 21:25, Harondel J. Sibble wrote:
> manufacturers utility to tell the drive to run in PIO or DMA33 mode, modes
> above dma33 require the 80pin cable, which is what you will have inside your
> pc and is likely why the drive works fine there.
On the Plextor manual it's said that a jumper on the back
is for DMA setting. It says:
DMA jumper: Use the DMA jumper to convert between
UltraDMA Mode 0-2 (no jumper, default) and Multiword
DMA Mode 0-2 (with jumper installed). In general, leave
this jumper at its factory setting, which is Ultra DMA
(that is, no jumper installed).
Should I install the jumper?
Last minute just before sending mail:
I installed on that enclosure an old Plextor cdrw, a Plexwriter 2410
and it's recognized immediately. The problem to be solved is with
the new Plextor DVD itself.
--
Gianmaria Fontana di Sacculmino,
PGP Keys: RSA 0x34BE0F71 - DH/DSS 0xF6C7AFAB
Thawte Web of Trust notary
--
----------------------------------------
WIN-HOME Archives: http://PEACH.EASE.LSOFT.COM/archives/WIN-HOME.html
Contact the List Owner about anything: [EMAIL PROTECTED]
Official Win-Home List Members Profiles Page
http://www.besteffort.com/winhome/Profiles.html
