Since it has a USB interface do this:
Connect a USB cable with a RJ-45 end adapter and connect an ethernet cable
from the finger-print reader to the wifi router and install a wifi card into
the PC.
Marc Sims
Data Technician I
Prince George's Community College
>>> [EMAIL PROTECTED] Wednesday, September 20, 2006 >>>
Hi Marc,
There is no Wifi or Bluetooth functionality in the FP reader. It does have a
USB interface, but only for loading its IP address from a memry stick. All
it can handle is a simple TCP/IP-based protocol.
We just (ha!) need something to replace 20 meters of cable with a
thru-the-air deal.
(blinding flash of light in my brain!) OR a thru-the-power-network deal!
I'll borrow a couple of these adapters from a friend, & try them!
Regards,
Richard.be
--
----------------------------------------
To Change your email Address for this list, send the following message:
CHANGE WIN-HOME your_old_address your_new_address
to: [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.
