First with only drive 0 in the system, does the bios actually
see *nothing* or does it see a drive with lower capacity? And
are you actually *IN* the bios while checking?
If the drive is being detected by the bios, but at a much lower
capacity then try:
(Master with CLJ)
The vertical jumper over the J48 pins is configuring the drive
as a Master.
The vertical jumper over the J44 pins is in the Cylinder
Limitation position.
This is shown at
<http://www.maxtor.com/_files/maxtor/en_us/documentation/jumper_settings/style_b.htm>
See if the bios can now see it, although it will be at a lower
capacity, which I believe will be 32 GB.
BTW what is the jumper set at now?
On Fri, 29 Sep 2006, steven wrote:
Drive 0 is a maxtor fireball 3 2f040l071. Jumper choices are
master slave; cs cable select; cylinder limitation. Which
should I use?
--
----------------------------------------
WIN-HOME Archives: http://PEACH.EASE.LSOFT.COM/archives/WIN-HOME.html
Contact the List Owner about anything: [EMAIL PROTECTED]
Official Win-Home List Members Profiles Page
http://www.besteffort.com/winhome/Profiles.html
