> -----Original Message-----
> From: stefmit [mailto:[EMAIL PROTECTED]
> Sent: mercoledì 10 settembre 2003 19.55
> To: [EMAIL PROTECTED]
> Subject: Re: [WinPcap-users] Syntax for adaptername using windump
> (ethereal?!?) and rpcap
>
>
> On Wednesday 10 September 2003 01:09 am, Fulvio Risso wrote:
> > Hi.
> > > On Tuesday 09 September 2003 08:13 am, Fulvio Risso wrote:
> > > <snip>
> > >
> > > > I have the WinDump working on my machine:
> > >
> > > ==================================================================
> > > =========
> > >
> > > >= ==============================
> > > > C:\cvsroot\analyzer\bin>windump -i
> > > > rpcap://127.0.0.1/\Device\NPF_{C8736017-F3C3-4373-94AC-9A34B7DAD998}
> > > >
> > > > windump: listening on
> > > > rpcap://127.0.0.1/\Device\NPF_{C8736017-F3C3-4373-94AC-9A34B7DAD998}
> > > >
> > > > 14:55:07.458092 arp who-has 192.168.1.1 tell truciolo
> > > > ....
> > >
> > > ==================================================================
> > > =========
> > >
> > > >= ==============================
> > > >
> > > > Which version are you using?
> > > > Are you using the latest alpha?
> > >
> > > <snip>
> > >
> > > On both ends: winpcap latest alpha 3.01, and windump 3.6.2 on the
> > > machine I am
> > > trying to do the monitoring from. I have used your syntax (with
> > > 'plain" IP),
> > > or within [] (as it appears on the analyzer), to no avail. My
> > > windump still
> > > complains about "error opening adapter", while - as I said - the
> > > analyzer has
> > > no problems running it ... I am at a loss here ...
> >
> > What about WinDump 3.8 alpha?
> >
> > http://windump.polito.it/install/bin/alpha/WinDump.exe
> >
> > The latest stable (3.6.2) doesn't work with remote capture.
> >
> > fulvio
>
> No go, Fulvio, I am sorry - now the version says:
> d:\analyzer\> windump -h
>
> windump version current-cvs.tcpdump.org, based on tcpdump version
> current-cvs.tcpdump.org
>
> and the results are the same (error). Actually, having seen your
> example, I
> just "installed" (i.e. downloaded) the alpha of windump on the machine I
> consider "remote", and tried the windump -i rpcap with the
> localhost, both as
> name and as IP address (127.0.0.1), with and without [] - I am
> getting the
> same "error opening adapter". Very odd ...
>
> Thx,
> Stef
This is my last try.
Do you launch the rpcapd daemon with the "-n" switch? WinDump does not
manages password, so you have to launch the daemon in such a way that
supports NULL authentication (that means "everyone can capture traffic on
your machine... so please be careful).
I cross my fingers...
fulvio
==================================================================
This is the WinPcap users list. It is archived at
http://www.mail-archive.com/[EMAIL PROTECTED]/
To unsubscribe use
mailto: [EMAIL PROTECTED]
==================================================================
