Hi John- We use AP groups, but are running 5.2.193, and our condition seems to be limited to an AP or two, or most APs on a single controller.
-Lee ________________________________________ From: The EDUCAUSE Wireless Issues Constituent Group Listserv [[email protected]] On Behalf Of John Duran [[email protected]] Sent: Friday, November 13, 2009 5:06 PM To: [email protected] Subject: Re: [WIRELESS-LAN] Wireless Clients Can See WLANs, but Cannot Connect (feels like only beacons functional) Good afternoon, Are any of you using AP Groups in these scenarios? We are seeing similar issues and it looks like there may be a problem with mobility group exchange information between the controllers. We are using code 6.0.182.0 on our controllers as well. We are debugging the client connectivity issues at the moment. Thanks, John V. Duran Network Engineer University of New Mexico Information Technology Ph: (505) 249-7890 Fax: (505) 277-8101 >>> "Eric T. Barnett" <[email protected]> 11/13/2009 1:45 PM >>> I have something similar. The APs function, but no one can connect. We're also running the 6.0 code and web-auth. I just have WCS reboot all of the APs once a week and they seem to work fine then. Eric Barnett Wireless Administrator Information and Technology Services Arkansas State University (870) 680-4243 [email protected] http://wireless.astate.edu -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Daniel Husand Sent: Friday, November 13, 2009 1:52 PM To: [email protected] Subject: Re: [WIRELESS-LAN] Wireless Clients Can See WLANs, but Cannot Connect (feels like only beacons functional) On 13/11/2009 19:43, Lee H Badman wrote: > Wondering if anyone else sees this condition in a Cisco LWAPP/CAPWAP > wireless environment: > > We seem to have occasional spates where select APs are clearly beaconing > SSIDs, but clients cannot connect. > We have this exact issue on the first iteration of the 6.0 software. It primarily affects our web-auth SSID. I did some captures of the association and the access point is actually denying the client because the 'encryption method' is not supported. (none) (I have a .pcap if someone wants it) TAC has not been able to reproduce or fix yet. -- Daniel Husand ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
