Got it, just did it per port-- same thing
On 1/11/2012 3:51 PM, Lee H Badman wrote:
For clarity- the power commands I referenced are port by port, not global.
-Lee
-----Original Message-----
From: The EDUCAUSE Wireless Issues Constituent Group Listserv
[mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Vikki Cutrone
Sent: Wednesday, January 11, 2012 3:50 PM
To:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] WAPS seem to die after switch reboot
Hi,
They are down/down never to come on line again. This is a show power
inline--
Fa1/0/33 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/34 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/35 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/36 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/37 auto on 15.4 Ieee PD 3 15.4
Fa1/0/38 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/39 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/40 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/41 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/42 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/43 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/44 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/45 auto on 12.2 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/46 auto on 15.4 Ieee PD 3 15.4
Fa1/0/47 auto on 15.4 Ieee PD 3 15.4
Module Available Used Remaining
(Watts) (Watts) (Watts)
------ --------- -------- ---------
1 370.0 231.0 139.0
2 n/a n/a n/a
3 n/a n/a n/a
4 n/a n/a n/a
Did a power inline never power inline auto--
Fa1/0/33 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/34 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/35 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/36 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/37 auto on 15.4 Ieee PD 3 15.4
Fa1/0/38 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/39 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/40 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/41 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/42 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/43 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/44 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/45 auto on 15.4 AIR-LAP1131AG-A-K9 3 15.4
Fa1/0/46 auto on 15.4 Ieee PD 3 15.4
Fa1/0/47 auto on 15.4 Ieee PD 3 15.4
Samm result
On 1/11/2012 3:32 PM, David Pita wrote:
Do a "show power inline | i AP", this will filter out the APs on the
power inline output. Verify that they are all there, then check cdp
details on each port to make sure they have an IP.
David Pita
Wireless Network Engineer
UTS Network Management Services
Florida International University
305.348.3658
On 01/11/2012 02:39 PM, Vikki Cutrone wrote:
Hello, I am running multiple Cisco 4404 controllers Vers-7.0.116 and
the majority of the WAPS are CAPWAP 1131's . The issue I seem to be
having is that lately when I reboot an access layer switch, POE, 3750
series, with WAPS attached, I lose some of the WAPS. The WAPS never
come back on line again and appear to be dead. They were completely
operational prior to the reboot, but after reloading the switch, no
switch configuration changes, the WAPS never come back on line. I
have shut/no shut the interfaces of the switch, and the switches POST
seems fine. Just wondering if anyone else has seen this issue, I
have lose about 30 WAPS so far. Thanks!!
Vikki Cutrone
Network Admin
Vassar College
**********
Participation and subscription information for this EDUCAUSE
Constituent Group discussion list can be found at
http://www.educause.edu/groups/.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found athttp://www.educause.edu/groups/.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found athttp://www.educause.edu/groups/.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
