On 13 Dec 2012, at 16:08, phanset <[email protected]> wrote: >>> Has been a while: What wireless printers have you found that successfully >>> work on 802.1x based wireless networks- particularly using MS-CHAPv2/PEAP, >>> WPA2, and AD back-end (as if the printer was just another host on the >>> secure network). >> >> If the reason why you're asking is because you've had issues with the above >> setup, and you happen to be using HP printers. >> >> The supplicant on HP printers before firmware releases in 2011 would not >> work correctly if using PEAP with the inner tunnel terminating on FreeRADIUS, > > > Arran, > > Is this problem just with FreeRADIUS or should it be with all flavors of > RADIUS like > RADIATOR, Microsoft IAS & NPS, CISCO ACS & ISE, Juniper Steel-Belted?
The original implementation was known to work with Microsoft IAS at least (and most likely NPS). For the others the only way to know would be to test. -Arran ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
