The default profile is even applied to the WLANs by default. Our position is that airplay is officially unsupported at this point since there are some unknowns administratively and politically with this, and we have some old WiSMs running 7.0 for a bit more yet. So we're not advertising this service or anything, but it looks like at least technically it works quite well. One thing I don't understand, is that I've seen a couple of appleTVs associated to those old WiSMs that are broadcasting themselves as airplay receivers. Since only 7.4 supports the gateway, I don't understand how those are getting advertised like that.
On Thu, Apr 25, 2013 at 2:18 PM, Mark Duling <[email protected]> wrote: > Hi Lee, > > The have a new document based on 7.4: > http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Bonjour_DG_Guide.pdf > > It is as simple as it could be now. Doesn't require multicast. Just > enable the Bonjour snooping option globallly on each controller (off by > default), and turn it off on each WLAN you don't want to snoop on (on by > default at WLAN level). That's it because there is a default profile that > you can use, but apparently now Apple in later ios releases has changed > airplay mirroring so you have to add the "AirTunes" service type to the > default profile (it is defined but not active) before mirroring will work. > It is incredibly simple on 7.4. > > Mark > > > On Thu, Apr 25, 2013 at 1:18 PM, Lee H Badman <[email protected]> wrote: > >> Mark-**** >> >> ** ** >> >> Do you have a Doc on the Airplay thing? Sometimes they come from places >> other than CCO…**** >> >> ** ** >> >> -Lee Badman**** >> >> ** ** >> >> *From:* The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto: >> [email protected]] *On Behalf Of *Mark Duling >> *Sent:* Thursday, April 25, 2013 3:50 PM >> >> *To:* [email protected] >> *Subject:* Re: [WIRELESS-LAN] Cisco WiSM2 7.4 stability issues?**** >> >> ** ** >> >> 7.4.100.0 has been very stable for us with failover pairs. We're >> enjoying the AirPlay support too, which seems very solid.**** >> >> ** ** >> >> On Wed, Apr 24, 2013 at 11:03 AM, Joe Roth <[email protected]> wrote:* >> *** >> >> Has anyone else seen stability issues with 7.4? We had to downgrade from >> 7.4 to 7.3 due to our 1142 APs crashing. We had the patched engineering >> release that was supposed to fix this, but apparently there were multiple >> 1142 issues. The bug that we were hitting has yet to be patched.**** >> >> ** ** >> >> Our hopes in going to 7.4 was to use a single HA only controller in a >> "pool" with our production controllers. Apparently this feature was >> implemented in 7.4. Has anyone been able to use this? We did not get to >> test it due to the downgrade.**** >> >> ** ** >> >> Thanks. >> **** >> >> ** ** >> >> -- >> Joe Roth >> Networking Group >> Binghamton University >> Ph. 607-777-7528 >> Fax 607-777-4009 **** >> >> ********** Participation and subscription information for this EDUCAUSE >> Constituent Group discussion list can be found at >> http://www.educause.edu/groups/. **** >> >> ** ** >> >> ********** Participation and subscription information for this EDUCAUSE >> Constituent Group discussion list can be found at >> http://www.educause.edu/groups/. ** ** >> ********** Participation and subscription information for this EDUCAUSE >> Constituent Group discussion list can be found at >> http://www.educause.edu/groups/. >> >> > ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
