We are currently a Cisco Catalyst shop with over 5,000 AP’s in use, plus a 
couple buildings with Aruba, but have decided that all future deployments will 
be Meraki.  Our first project is going to be with ~480 Meraki AP’s (mixed 
internal & external antennae and some hospitality APs) in our main library.

I can’t answer many of your questions with regards to experience because we are 
not there, yet.  However, Meraki did provide us with contacts at some of their 
largest customers and we were able to speak with them.  The customers were 
candid about some issues early on (pre-Cisco), but said since the acquisition 
things have been very stable.  Also, many of the issues described were with 
regards to the Meraki switch and security appliances.  Very little to do with 
the APs themselves.

We decided to go with Meraki due to the value proposition of everything that is 
included in the single AP license.  To license a similar catalyst AP the costs 
were outrageous, plus all the associated appliances required to make use of 
those metrics.  Another big factor was the commitment from Meraki to always 
support their APs regardless of age and never be “forced” into upgrading due to 
EOL/EOS.  We are currently dealing with that on campus with both APs and 
controllers.  We really wanted to get out of that game.

Other than Cisco catalyst we also considered Mist.  What concerned us with Mist 
was the lack of experience with large deployment and high density environments. 
 Also, at the time they did not have a hospitality AP which we use in dorms, 
offices, and some other creative areas.  We would have pretty quickly become 
their largest customer and that’s not something that I was willing to do.

Hope this helps at least somewhat.


Kyle Ragan
Associate Director, Network Engineering and Operations
[email protected]<mailto:[email protected]>
303.735.4008

Office of Information Technology
University of Colorado Boulder
3645 Marine Street, Rm 212H
Boulder, CO 80309

[cid:[email protected]]




From: The EDUCAUSE Wireless Issues Community Group Listserv 
<[email protected]> On Behalf Of James Helzerman
Sent: Monday, May 11, 2020 7:58 AM
To: [email protected]
Subject: [WIRELESS-LAN] Meraki at large universities

Hi.  Is anyone looking at or currently using Meraki in a large university?  I 
am curious as to how far their product has come after a few years from the 
Cisco purchase.  For sizing purposes I am looking at deployments of 500 or more 
Meraki APs with 8+ APs in high density auditoriums and/or seat 400-600 
students.   In particular I am looking for information on:

  *   How many APs total do you have on your campus?
  *   What is the peak number of concurrent connections you have seen on the 
system?
  *   What is the largest high density area you have covered?  How many APs, 
special settings, models of AP, etc.
  *   What made you choose Meraki over different vendors?
  *   Do you have multiple vendors on your campus?  If so which ones?
  *   If you had a controller based infrastructure before, what changes did you 
have to make to your architecture?  How much time did it take to do this, what 
issues did you run into?
  *   What success stories can you share?
  *   What issues do you see or have had with the product?
  *   How customizable are the settings compared to Cisco or Aruba?
  *   What do you like or dont like about the products and/or architecture?
Answers dont need to be long or in depth, I am just gauging adoption at larger 
universities.  If you prefer, feel free to direct message me.

Thanks for any input you can provide!

-Jimmy

--
James Helzerman
Wireless Network Engineer
University of Michigan - ITS
Phone: 734-615-9541

**********
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

**********
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

Reply via email to