�� 25 06 2002 00:16, Gene ���������: > I noticed that there were some discussions on this topic before. > > Anyway, according to Orinoco's client manager and netstumbler, it's > connected and it better be since they are less that a few inches apart, so > I know it's something wrong with the network config. > > I have the WAP11 set to AP mode. > > The thing is, every now and then, W2k reports that it lost the network > connection (the infamous "network cable unplugged" message) and I can't > seen to ping it when I disconnect the WAP11 from the LAN, though the > Orinoco should be able to. Not to mention that the speeds cycles thru 11Mb > to 1Mb. And the client manager's link test fails (no connection) and is > usually greyed out. > > Is there an inheritent incompatibility between the two? > > Thanks. > > G.
I saw the same - WAP 11 v2.2 must to have link on the eth port to be operational in AP mode. A HUB is good decision. Don't ask me why. -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
