As far as I know the AP-500 does not do NAT at all. -Rasmus
On Wed, 9 Oct 2002, Tyson Macaulay wrote: > Robi, > > For converting an RG-1000 to an AP-500 start with: > > http://www.personaltelco.net/index.cgi/ApFirmwareSwapping > > >From here you will find links to all the various components you need - > like Freebase. (Assuming you are doing it from a Windows box) > > A few things that are not as obvious: > > A) The firmware for the AP-500 can be found in the RG-1000 Manager > software which doubles as the AP-500 install CD. You have to install > the "AP Manager" which includes the apxxxxx.bin files. (If you look > for the firmware on the Orinoco site it is nowhere to be found.) > > B) You can only flash from the LAN interface. (At least as far as I cold > manage) So you will need a hub or null cable to connect your laptop and > the RG-1000 at the same time. I tried using the air-interface and > could not get it to work. > > C) Overall the process was flaky but worked in the end. I had to re-set > the AP a few times and at one point it stopped responding until I tried > to connect with the RG Manager and generate an error - at which point > Freebase would work again. > > > Question for the group - if anyone read this far: can the AP-500 > actually NAT? I don't want the AP to bridge - I want a different subnet > for the wireless and wired networks. Freebase seems to allow these > configs, but they don't "take" with the AP-500, and the AP Manager does > not support NATing at all... > > -- > Tyson Macaulay > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
