I picked up a WAP11 v2.8 yesterday. The web interface is broken (username admin password admin doesn't work) and there is very little one can do with them it appears.
The chip onboard is labelled ADMtek model ADM8628. I tried uploading normal atmel firmware, but nogo. I suspect they are still an RFMD chipset, possibly 17-18dBm tx power in the latest (only based on reference designs I've found for the ADM8628). Footprint is still the same and the MAC addresses are still basically the same 000c41, but the units come with a 12vDC PS, will operate as low as 5vDC (although I'm not sure how well at 5v) and nothing else appears to be anything similar to the old units. The web site has zero details, no firmware updates, no support information, no announcements of the change. The packaging the units come in are now different, more purple, rather than blue. Not much of the sky blue on the boxes they come in. Easy to identify the difference. Bad thing appears that these units are now all over town and I can't find any v2.6 units anymore. I just ordered 10 new units online and if I get v2.8 I may be selling them ASAP. Anyone interested in v2.8 WAP11's if I get them and they aren't v2.6? Any other info on the v2.8 would be greatly appreciated, especially if you know details on firmware availability and compatibility. Judd Stefan Schueller wrote: > Hi Everyone, > > Ok, I know the differences between most WAP11 versions but what type of > hardware does the v2.8 use? > > v1.1 ATMEL (USB/SNMP) > v2.2 TI (HTTP) > v2.6 ATMEL (HTTP/SNMP) > v2.8 ? > > thanks > > -Stefan > http://www.hartwellroad.net/ > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
