Anyone got an SNMP manager that works with the WAP11 v2.8 and/or MIB file for it?
MIB file might be all I need, but a working SNMP manager would be great too. Thanks, Judd [EMAIL PROTECTED] wrote: > Thanks Much, that did work. > > Judd > > Dave Holmes-Kinsella wrote: > > > Try no username; password admin. > > > > Cheers > > -- dhk > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > [EMAIL PROTECTED] > > Sent: Tuesday, September 23, 2003 1:21 PM > > To: Stefan Schueller > > Cc: [EMAIL PROTECTED] > > Subject: Re: [BAWUG] WAP11 differences > > > > I picked up a WAP11 v2.8 yesterday. The web interface is broken > > (username > > admin password admin doesn't work) and there is very little one can do > > with > > them it appears. > > > > The chip onboard is labelled ADMtek model ADM8628. I tried uploading > > normal atmel firmware, but nogo. I suspect they are still an RFMD > > chipset, > > possibly 17-18dBm tx power in the latest (only based on reference > > designs > > I've found for the ADM8628). Footprint is still the same and the MAC > > addresses are still basically the same 000c41, but the units come with a > > 12vDC PS, will operate as low as 5vDC (although I'm not sure how well at > > 5v) and nothing else appears to be anything similar to the old units. > > > > The web site has zero details, no firmware updates, no support > > information, > > no announcements of the change. > > > > The packaging the units come in are now different, more purple, rather > > than > > blue. Not much of the sky blue on the boxes they come in. Easy to > > identify the difference. Bad thing appears that these units are now all > > over town and I can't find any v2.6 units anymore. > > > > I just ordered 10 new units online and if I get v2.8 I may be selling > > them > > ASAP. Anyone interested in v2.8 WAP11's if I get them and they aren't > > v2.6? > > > > Any other info on the v2.8 would be greatly appreciated, especially if > > you > > know details on firmware availability and compatibility. > > > > Judd > > > > Stefan Schueller wrote: > > > > > Hi Everyone, > > > > > > Ok, I know the differences between most WAP11 versions but what type > > of > > > hardware does the v2.8 use? > > > > > > v1.1 ATMEL (USB/SNMP) > > > v2.2 TI (HTTP) > > > v2.6 ATMEL (HTTP/SNMP) > > > v2.8 ? > > > > > > thanks > > > > > > -Stefan > > > http://www.hartwellroad.net/ > > > > > > -- > > > general wireless list, a bawug thing <http://www.bawug.org/> > > > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > > > > -- > > general wireless list, a bawug thing <http://www.bawug.org/> > > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > > -- > general wireless list, a bawug thing <http://www.bawug.org/> > [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
