Maybe This Can Shed Light on the EXTRA Benefits of adding a WSB24 to a BEFW11S4 or
WAP11
There seems to be some MAJOR Misunderstanding or at least not documented of some EXTRA
Functionality of adding a WSB24 to a BEFW11S4 or a WAP11 for that matter.
Not ONLY does the WSB24 amplify both the receive and transmit signal on BOTH the
BEFW11S4 and the WAP11 it also allows both of these units ("And currently ONLY these
units") to be FULL-DUPLEX at "Virtually" 20Mbps which DOUBLES the bandwith on BOTH the
BEFW11S4 and the WAP11 by using one antenna as transmit at 10Mbps and the other
antenna at 10Mbps receive. This all happens AUTO-MAGICALLY with NO firmware changes to
the BEFW11S4 or the WAP11.
So when building a Wireless Network it is important to realize that even if you don't
start with the WSB24 as part of your initial Wireless Network plans you can in the
future DOUBLE your bandwith between BEFW11S4's and WAP11's Increase transmit power as
well as increase receiver sensitivity at a later time in the future.
Additionally Linksys NOW has a new firmware version which allows the WAP11 to act as a
repeater BUT only with other WAP11's. So you now have the ability to do all the above
and extend your Network as well, sweet huh?
Hope The Above Info Helps :-) [EMAIL PROTECTED]
--
general wireless list, a bawug thing <http://www.bawug.org/>
[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
