This is so wrong.
Full Duplex wireless (in the same frequency) is a 120dB problem, possibly more.
Jim
On Sunday, October 19, 2003, at 3:52 PM, [EMAIL PROTECTED] wrote:
Maybe This Can Shed Light on the EXTRA Benefits of adding a WSB24 to a BEFW11S4 or WAP11
There seems to be some MAJOR Misunderstanding or at least not documented of some EXTRA Functionality of adding a WSB24 to a BEFW11S4 or a WAP11 for that matter.
Not ONLY does the WSB24 amplify both the receive and transmit signal on BOTH the BEFW11S4 and the WAP11 it also allows both of these units ("And currently ONLY these units") to be FULL-DUPLEX at "Virtually" 20Mbps which DOUBLES the bandwith on BOTH the BEFW11S4 and the WAP11 by using one antenna as transmit at 10Mbps and the other antenna at 10Mbps receive. This all happens AUTO-MAGICALLY with NO firmware changes to the BEFW11S4 or the WAP11.
So when building a Wireless Network it is important to realize that even if you don't start with the WSB24 as part of your initial Wireless Network plans you can in the future DOUBLE your bandwith between BEFW11S4's and WAP11's Increase transmit power as well as increase receiver sensitivity at a later time in the future.
Additionally Linksys NOW has a new firmware version which allows the WAP11 to act as a repeater BUT only with other WAP11's. So you now have the ability to do all the above and extend your Network as well, sweet huh?
Hope The Above Info Helps :-) [EMAIL PROTECTED] -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
-- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
