Nope I dont think it is. ONly way is buying 100 + radios from senao from
some one that is willing to sell you 100 units for $80 then your ok
----- Original Message -----
From: "George" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Wednesday, October 26, 2005 3:51 PM
Subject: Re: [WISPA] Senao Question
Pete Davis. NoDial.net wrote:
I like the features of the Tranzeos, the Smartbridges, etc etc, but at
$100 more per CPE, my 200 2611 clients would have cost me $20k more. If
anyone can tell me another way to get a 36db POE client for less than
$150 PLEASE contact me off list to [EMAIL PROTECTED]
I learned that the hard way.
Pete Davis
NoDial.net
Well I would say that Teletronics EZ Bridges were good. I have 500 +/- of
them.
And they have a 200MW version.
But lately, I've been getting some bad ones in my orders.
The 100mw pcb kit is 100.00 or so and the 200mw is 125.00 or so.
But I would caution buyer beware, since buying the pcb only version and
not the full fledges outdoor unit, I've noticed a lot of doa''s and
unstable units.
Will be nice when StarVX Lonnie gets his single radio cpe.
I understand it may be in the price range you mentioned.
George
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
