We were doing quite a bit with our 3640 but from my experience the box
did not hold up well under load. Be cautious when considering doing
traffic shaping with your 3640. Watch the memory and CPU load closely.
Scriv
John Thomas wrote:
Mark, go over to http://www.mikrotik.com/download.html#dude
See if it does some/all of what you need.
As for limiting/shaping, your 3640 may do what you need.
John
Mark Nash wrote:
I'm at the point on my network now that I really need to control
unnecessary bandwidth usage. The biggest problem is the p2p users
with their excessive upload, and worms come in a close second.
My network is comprised of a Cisco 3640, Cisco C4840G L3 switch for
segmenting, and Dell 3324 managed switches. I have run ntop in the
past but I believe it only reports interactively through the web
interface. I wouldn't consider myself too far off from obtaining an
SNMP station/software like SNMPc.
I'm needing to implement a solution that will monitor, alert on, and
control this type of traffic. Either not pass it or rate-limit it.
I'm interested in solutions that have been implemented, home-grown,
tested, failed, etc.
Thanks in advance...
Mark Nash
Network Engineer
UnwiredOnline.Net
325 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
