Blair Davis wrote:
Try....
http://www.wisp-router.com/index.php?cPath=38&osCsid=35487c8a3c68aaca1f13a9fe560a0c26
Blair
John Scrivner wrote:
Can anyone hook me up with a source for the 48 volt supplies? I need
to buy some of those DS3 to Ethernet converters and they require that
supply. I have never seen them before and need a source. Also, does
anyone have a manual and/or drawings of the PCOM radios we are
buying? I need to start reading up on these radios to make sure I
know what all I need to get them installed. Please help if you have a
source of information on them. If any of you have experience with the
PCOMs and DS3 to Ethernet converters I would like to pick your brain
on a few things.
Many thanks,
Scriv
Eje has no stock of 48 vdc anything unfortunately. You also need to
look at the current draw. john will need a 48 vdc supply to run the
radios also. Might as well get something that will do the job right.
-B-
--
Bob Moldashel
Lakeland Communications, Inc.
Broadband Deployment Group
1350 Lincoln Avenue
Holbrook, New York 11741 USA
800-479-9195 Toll Free US & Canada
631-585-5558 Fax
516-551-1131 Cell
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
