"Back to backk on a pole" might be a problem. Are the antennas at least
6' apart from each other? (horizontally or vertically?) Physical
separation may not be an issue until the subscriber numbers go up, but
it be a problem.
Pete Davis
NoDial.net
Brian Rohrbacher wrote:
Here is what I use.
http://www.demarctech.com/products/reliawave-antennas/2_4Ghz/DT-AN-24-120H-135.html
I have three mounted back to back on a pole. It all worked fine until
I hit a higher number of subscribers. Maybe it's the interference
from too many subs or maybe it's the fact that a majority of my subs
are locked into 1M air rate, or maybe its because the subs are NLOS,
or maybe because of the F/B or side to side isolation. So what is my
problems? High pings and timeouts. Only when traffic is high. Or
maybe my 600k upload is maxed out and everything is stacking up. One
thing I do know is I hooked up subs I shouldn't have.
I am looking for advice on antennas. Check out the ones I am using
ans point me to 3 sectors that will perform good back to back, NLOS,
and maybe a higher gain to grab a little more signal to get the 1M
subs up to 11M.
Thanks all.
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
