Thanks for the offer Ben.

But we'll have all of these units out in the field long before you can get a box of nuts to me!

If it REALLY bothers me, I'll just run down to the local hardware store and buy my own nuts. grin

It's MUCH more fun to pick on you guys once in a while though.  evil grin

Say, I have a question for you. When and why did you move from the welded to the stamped base plates for the Sat. arms? I'd guess that they are a bit cheaper to make, but the material seems thinner. Are they as strong?

Marlon
(509) 982-2181                                   Equipment sales
(408) 907-6910 (Vonage)                    Consulting services
42846865 (icq)                                    And I run my own wisp!
[EMAIL PROTECTED]
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam



----- Original Message ----- From: "Marketing" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <wireless@wispa.org>
Sent: Wednesday, December 27, 2006 4:08 PM
Subject: RE: [WISPA] Alvarion Comnet Radios have arrived


George,

We are definitely listening.  This will be changed going forward.  If you
need some additional flange nuts (7/16), let me know.  Same goes for you
Marlon.

Regards,
Ben

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of George Rogato
Sent: Friday, December 22, 2006 3:31 PM
To: WISPA General List
Subject: Re: [WISPA] Alvarion Comnet Radios have arrived

Marlon K. Schafer (509) 982-2181 wrote:
Grin, while I've certainly noticed Brad's almost religious dislike of
Alvarion I do have to side with him on this.  I just called Ben Moore at
PacWireless yesterday to bitch about the new Sat. arm mounts he sent me.
They have some bizarre metric nut on the dang things.  Now I have to
carry FOUR tools up the ladder.

Why can't everyone use 7/16, 12mm?  Those are the same size!!!!  People
have the same size bolts, it's just the damned nut size that they keep
screwing with.

If there's a standard out there, please stick with it.  We have enough
things to remember to do without custom wiring standards or strange
default username/password combos!

BINGO, we found this out yesterday and hope that this is a temporary thing.

Hope fully Ben is reading this.. Not a good thing to change.

George

--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/


--
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to