yeah but, most of the Metrocom stuff was around 20 degree beamwidth wide and
60 degree or so beamwidth tall.
A lot of wasted spectrum up in the air, appropriate for a lot of small
channel sectors and freq hoppers, but not so good for 3 usable DSSS channels
and 360 deg coverage.
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
----- Original Message -----
From: "Matt Liotta" <[EMAIL PROTECTED]>
To: "WISPA General List" <[email protected]>
Sent: Friday, February 16, 2007 7:02 PM
Subject: Re: [WISPA] Looking for dual band 2.4 and 900 Sector antennas
If you can find some old Metrocom sectors you will have what you need. I
believe a bunch of them are still up at Blackjack if you want to take them
down. Otherwise, Superpass makes some.
-Matt
Ralph Fowler wrote:
I was about to post the same question.
I have a location where I need duals as well!
Ralph
-----Original Message-----
Subject: [WISPA] Looking for dual band 2.4 and 900 Sector antennas
I am trying to reduce wind-loading on a tower.
Any suggestions would be great!
thanks!
ryan
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/