I've heard that Ethernet only the MT boards move an impressive amount of
data... don't quote me, but I heard almost 100 megs. Wireless would be the
20 - 30 megs you describe.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message -----
From: "Russ Kreigh" <[EMAIL PROTECTED]>
To: "'WISPA General List'" <[email protected]>
Sent: Tuesday, August 07, 2007 2:33 PM
Subject: RE: [WISPA] ethernet switches, again
You could use a Mikrotik RB532 with a 564 db, that'll get you to about
20mbps.
Or, you could go the Mikrotik RB192 route, I think they will have 9
ethernet
ports.
The RB 150's have 5 ports.
Then there is this too.
http://www.demarctech.com/products/reliawave-rwo/reliawave-snmp24b.html
Thanks,
Russ Kreigh
Network Engineer
OnlyInternet.Net Broadband & Wireless
Supernova Technologies
Office: (800) 363-0989
Direct: (260) 827-2486
Fax: (260) 824-9624
[EMAIL PROTECTED]
http://www.oibw.net
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Mac Dearman
Sent: Tuesday, August 07, 2007 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] ethernet switches, again
Dang Marlon - sounds like you need a routed (Dynamic or the real "ugly
word"
STATIC) network :-)
I use VLAN tagging and Linksys (SRW208) switches at my towers in small
outdoor (non vented) enclosures. I haven't lost but 1 due to lightning in
the last year, but then I lost everything on the tower. We also use the
APC
surge protectors in a small rack mount box (holds 4 ethernet surge
protectors)
http://www.provantage.com/linksys-srw208~7LNKW01T.htm (switch)
http://www.provantage.com/apc-pnetr5~7AMPN04K.htm (RJ45 surge module)
http://www.provantage.com/apc-prm4~7AMPQ02L.htm (Module box)
GL,
Mac
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Marlon K. Schafer (509) 982-2181
Sent: Tuesday, August 07, 2007 11:29 AM
To: [email protected]
Cc: [EMAIL PROTECTED]
Subject: [WISPA] ethernet switches, again
I know this has come up from time to time but I need to ask again.
Here's what I'm looking for.
Cheapish. I have 20 plus sites out there so I need to watch the
budget on this. I don't want too cheap though, more inexpensive than
cheap.
I need the ability to force all traffic to an uplink port. In other
words I don't want any traffic from ap 1 to get to ap2 without first
going through the router. But, I need the ability to plug my laptop
into a port that can still get to all other ports.
I also want to be able to block all broadcast traffic and non ip
traffic if I can.
5 port and 8 port versions would do the trick.
They have to be good quality and not blow with every lightning storm
that comes along.
What would you guys use? And don't say ebay, I don't know enough
about what I'm doing with them yet, I want the ability to call the
factory for tech support.
thanks,
Marlon
(509) 982-2181
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) WISP Operator since
1999!
[EMAIL PROTECTED]
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
--
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/