we've found transient power can reset DD-WRT on the buffalo APs. It only has to happen once to be a pain. Never saw this with openwrt based buffalos. My remote office runs on a generator that cuts over to inverters and causes power burps! I thought this problem was due to our setup, until I had a 35mile service call to a bus. customer who's router reset!
On 11/1/07, Carl Shivers <[EMAIL PROTECTED]> wrote: > I recently bought a batch of Buffalo AirStations, which run WHR-HP-G54. > Based upon recommendations, I also installed DD-WRT in order to improve the > OS, I thought, and so I have functionality I wouldn't normally have, like > SNMP. > > > > These are working fine except for one problem, on several, we have noticed > that the DHCP server will simply stop giving out ip addresses. We are not > sure why, but everything works fine after rebooting the router 1 or 2 times. > Also, putting static private addresses in works as well after turning off > DHCP. > > > > I need to know if there is a fairly good router out there that will handle > DHCP and allows to use SNMP. I would like to have my cake and eat it too by > keeping my costs under $70. These are used primarily for residential. > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/