Thanks for offering to help,
Here's what I have.
My noc is across a creek from a water tank that I have a dozen ap's on.
So I have to do aerial to get there. I want to use an aerial cable that
has a lot of fibers in it. So I can put each radio on it's own fiber and
not have a switch at the tank.
I also want to extend the rest of the unused fibers out to do a fiber to
the premises roll out.
What I'm not sure is what type or size of fiber to pull, considering I
want to break it out and go down the street.
I'm assuming single mode and I'm thinking this drop is short, 550', I
can use like 128 strands.
I am assuming going up the street to the homes, It would be a PON network.
So I'm not sure of the fiber, or the network equipment behind it.
George
Scott Reed wrote:
I may not get you all the answers, but here are some questions you need
to answer to get answers:
How far do you want to go?
What kind of data and data rates are you looking for?
What equipment is at the ends?
Hanging from poles, buried, etc.?
George Rogato wrote:
Anyone do fiber?
I'm wondering where I should be looking for good pricing on some
aerial fiber.
I don't know very much about fiber at all, so I also need some advice
on what fiber I should be using as well as what connectors.
Anyone have any experience?
Thanks
--
George Rogato
Welcome to WISPA
www.wispa.org
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
