Yes, to not use an Omni, but to use an Array. Max Rad made some of the first ones for 2.4G. Hyperlinktech makes some 4 sector arrays for 5.8Ghz. If needing only Verticle polarity, this is easy. Thats the configuration they sell them in. Will probably cost you around $600, for the kit with all antennas and the combiner. You could always make your own.
With a mount hieght of only 50 ft though, not sure why this is a problem, if you are only needing to extend 1/10th of a mile coverage. A nice 10dbi Omni with 2 deg elect downtilt, Proxim makes one, or Tessco's terrawave Omni, would probably work just fine for that application. For such short range, even a 7-9db antenna would be fine, giving you a plenty large enough verticle beamwidth and high enough power. If its not good enough because of NLOS foliage or Noise, I'd argue you shouldn't be using an Omni in the first place. If a low bandwdith applications, as perfect application for a StarOS system, using 4 radios (or 3 radio in this app), each on their own 5 Mhz channel, using directional antennas using the Front to back ratio advantage, buying verticle pol 120 deg sector antennas for under $150 each. Its sometimes easier to do that, than get 1 channel to survive the noise in all directions. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: "rwf" <[EMAIL PROTECTED]> To: <wireless@wispa.org> Sent: Sunday, January 13, 2008 11:14 AM Subject: [WISPA] 5.8 vertical antenna w downtilt >I have an application where I need a 5.8 omni antenna with downtilt. > The coverage diameter of the area is only about 1/10th of a mile total, > and > my HAAT is about 50 ft so I will need some pretty severe downtilt. > Gain doesn't really matter, but a higher gain antenna is going to give me > a > flatter pattern- I just need it to be tilted down. > > This is to keep an access point from interfering with a mesh deployment > further out that I want to protect as much as possible. > > Anyone got a suggestion for such an antenna.. > > Oh yeah- this has to be vertically polarized > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
