If you like, please provide me the cable length and type on each end. Then provide me the loss figures you have entered for each side. We'll compare notes between yours and ours.
What version are you running? Best, Brad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bryan Scott Sent: Wednesday, January 16, 2008 9:21 AM To: WISPA General List Subject: Re: [WISPA] Looking for short licensed link > ----- Original Message ----- > From: "Brad Belton" <[EMAIL PROTECTED]> > >> Just a suggestion, but I would cross reference your cable loss settings >> with >> the manual's guidelines. >> >> Your flaky behavior could be due to the ODU being overdriven or starved >> for >> power. Then again if you've already had Trango looking into this I'm sure >> they have already thought to double check your cable loss settings. >> I've calculated the values according to Times Microwave's site and the distances of the cable used, and it helped, but we're still seeing random latency in ping tests across the thing. I'll check the ATPC settings someone else mentioned; I know that we've got rate shifting turned off. -- Bryan ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
