Wonder if the wireless PCB is available without the box? I could build it into an antenna. ----- Original Message ----- From: "Butch Evans" <[EMAIL PROTECTED]> To: "WISPA General List" <[email protected]> Sent: Wednesday, January 23, 2008 4:08 PM Subject: Re: [WISPA] FCC Certifiable MikroTik? YES!!
> On Wed, 23 Jan 2008, Travis Johnson wrote: > >>Here is where it will get interesting... in the actual MT software. >>How are they going to "lock down" the software so the power >>outputs, channels, etc. are all within FCC guidelines? They are >>almost going to have to have a seperate MT version... which to me >>seems pretty unlikely. :( > > There is/will be a package installed that will set these limits. It > does not require a unique "version", per se. This is what was done > for at least one upcoming release of some certified systems. > > -- > Butch Evans > Network Engineering and Security Consulting > 573-276-2879 > http://www.butchevans.com/ > My calendar: http://tinyurl.com/y24ad6 > Training Partners: http://tinyurl.com/smfkf > Mikrotik Certified Consultant > http://www.mikrotik.com/consultants.html > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
